User Manual

60
ROG STRIX B450-F GAMING II BIOS Manual
Address Hash CS
This item allows you to enable or disable CS address hashing.
Configuration options: [Enabled] [Disabled] [Auto]
Address Hash Rm
This item allows you to enable or disable RM address hashing.
Configuration options: [Enabled] [Disabled] [Auto]
SPD Read Optimization
This item allows you to enable or disable SPD Read Optimization, if set to
[Enabled], SPD reads are skipped for Reserved fields and most of upper
256 Bytes. If set to [Disabled], read all 512 SPD Bytes.
Configuration options: [Enabled] [Disabled] [Auto]
NVDIMM
Memory MBIST
MBIST Enable
This item allows you to enable or disable Memory MBIST.
Configuration options: [Enabled] [Disabled]
The following item appears only when MBIST Enable is set to [Enabled].
MBIST Test Mode
This item allows you to select the MBIST Test Mode.
[Interface Mode] Tests Single and Multiple CS Transactions and
Basic Connectivity.
[Data Eye Mode] Measures voltage vs. Timing.
MBIST Aggressors
This item allows you to enable or disable Memory Aggressor test.
Configuration options: [Enabled] [Disabled] [Auto]
MBIST Per Bit Slave Die Reporting
This item allows you to enable or disable MBIST per bit slave die result
report.
Configuration options: [Enabled] [Disabled] [Auto]
Data Eye
Pattern Select
Configuration options: [PRBS] [SSO] [Both]
Pattern Length
This token helps to determine the pattern length.
Configuration options: [3] - [12]
Aggressor Channel
This helps read the aggressor channels. If it is set to [Enabled], you can
read from one or more than one aggressor channel. The default is set to
disabled.
Configuration options: [1 Aggressor Channel] [3 Aggressor Channels]
[7 Aggressor Channels] [Disabled]
Aggressor Static Lane Control
Configuration options: [Disabled] [Enabled]