User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 Trusted Computing
- 6.2 AMD fTPM configuration
- 6.3 CPU Configuration
- 6.4 ROG Effects
- 6.5 SATA Configuration
- 6.6 Onboard Devices Configuration
- 6.7 APM Configuration
- 6.8 PCI Subsystem Settings
- 6.9 USB Configuration
- 6.10 Network Stack Configuration
- 6.11 HDD/SSD SMART Information
- 6.12 AMD Overclocking
- 6.13 AMD CBS
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
ROG STRIX B450-F GAMING II BIOS Manual
59
PMU Pattern Bits Control
Configuration options: [Auto] [Manual]
The following item appears only when you set PMU Pattern Bits Control to [Manual].
PMU Pattern Bits
Configuration options: [0] - [A]
MR6VrefDQ Control
Configuration options: [Auto] [Manual]
The following item appears only when you set MR6VrefDQ Control to [Manual].
MR6VrefDQ
Configuration options: [0] - [7F]
CPU Vref Training Seed Control
Configuration options: [Auto] [Manual]
The following item appears only when you set CPU Vref Training Seed Control to
[Manual].
CPU Vref Training Seed
Configuration options: [0] - [FF]
DRAM Memory Mapping
Chipselect Interleaving
This item allows you to set interleave memory blocks across the DRAM
chip selects for node 0.
Configuration options: [Disabled] [Auto]
BankGroupSwap
Configuration options: [Enabled] [Disabled] [Auto]
Please set BankGroupSwapAlt to [Disabled] if BankGroupSwap is set to [Enabled].
BankGroupSwapAlt
Configuration options: [Enabled] [Disabled] [Auto]
The following item appears only when you set BankGroupSwapAlt to [Enabled].
Address Hash Bank 2 ColXor
Configuration options: [0] - [FFF]
Address Hash Bank
This item allows you to enable or disable bank address hashing.
Configuration options: [Enabled] [Disabled] [Auto]