User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 Trusted Computing
- 6.2 AMD fTPM configuration
- 6.3 CPU Configuration
- 6.4 ROG Effects
- 6.5 SATA Configuration
- 6.6 Onboard Devices Configuration
- 6.7 APM Configuration
- 6.8 PCI Subsystem Settings
- 6.9 USB Configuration
- 6.10 Network Stack Configuration
- 6.11 HDD/SSD SMART Information
- 6.12 AMD Overclocking
- 6.13 AMD CBS
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
46
ROG STRIX B450-F GAMING II BIOS Manual
6.13 AMD CBS
The items in this menu shows the AMD Common BIOS Specifications.
The following item appears only when VTT Voltage Control is set to [Enabled].
Adjust VTT MEM Value
Configuration options: [113] - [143]
NUMA nodes per socket
NUMA nodes per socket
Specifies the number of desired NUMA nodes per socket. Zero will attempt to
interleave the two sockets together.
Configuration options: [Auto] [NPS0] [NPS1] [NPS2] [NPS4]
CPU Common Options
Performance
Custom Core Pstates
This item allows you to enable custom P-states and throttling.
Damage caused by use of your AMD processor outside of specification or in excess of
factory settings are not covered by your system manufacturers warranty.
The following items appear only when [Accept] is selected for Custom Core Pstates.
Custom Pstate0
Configuration options: [Auto] [Custom]
The following items appear only when Custom Pstate0 is set to [Custom].
Pstate0 Freq (MHz)
Specifies the core frequency(MHz).
Pstate0 VID
Specifies the core voltage.