User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 Trusted Computing
- 6.2 AMD fTPM configuration
- 6.3 CPU Configuration
- 6.4 ROG Effects
- 6.5 SATA Configuration
- 6.6 Onboard Devices Configuration
- 6.7 APM Configuration
- 6.8 PCI Subsystem Settings
- 6.9 USB Configuration
- 6.10 Network Stack Configuration
- 6.11 HDD/SSD SMART Information
- 6.12 AMD Overclocking
- 6.13 AMD CBS
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
26
ROG STRIX B450-F GAMING II BIOS Manual
VDDCR CPU Power Phase Control
This item allows you to set the power phase control of the CPU.
[Standard] Set to standard mode.
[Optimized] Set to the ASUS optimized phase tuning profile.
[Extreme] Set to the full phase mode.
VDDCR CPU Switching Frequency
Configuration options: [200] [250] [300 [350]
DO NOT remove the thermal module. The thermal conditions should be monitored.
Tweaker’s Paradise
Force OC Mode Disable
If this item is set to [Enabled], OC Mode will be disabled rendering customized ratios
useless. Used mainly for pure slight boost of BCLK while retaining XFR mode.
Configuration options: [Enabled] [Disabled]
VTTDDR Voltage
This item allows you to set the termination voltage for the DRAM. Default is 1/2 of
DRAM Voltage. Use the <+> or <-> to adjust the value. The values increment with an
interval of 0.005V.
Configuration options [Auto] [16.58000V] - [16.78000V]
VPP_MEM Voltage
This item allows you to configure the voltage for the VPP_MEM. Use the <+> or <-> to
adjust the value. The values increment with an interval of 0.005V.
Configuration options [Auto] [2.500V] - [2.800V]
CPU 1.80V Voltage
This item allows you to configure the voltage for the CPU 1.80V. Use the <+> or <-> to
adjust the value. The values increment with an interval of 0.005V.
Configuration options [Auto] [1.80V] - [2.20V]
2.5V SB Voltage
This item allows you to configure the voltage for the 2.5V SB. Use the <+> or <-> to
adjust the value. The values increment with an interval of 0.05V.
Configuration options [Auto] [2.5V] - [2.55V]
VDDP Standby Voltage
This item allows you to configure the voltage for the VDDP Standby Voltage. Use the
<+> or <-> to adjust the value. The values increment with an interval of 0.005V.
Configuration options [Auto] [0.900V] - [1.050V]
CLDO VDDP voltage
This item allows you to configure the voltage for the CLDO VDDP. Use the <+> or <->
to adjust the value. The values increment with an interval of 0.001V.
Configuration options [Auto] [0.700V] - [1.800V]
CPU Core Voltage
Configures the mode of Voltage fed to the cores of the processor. Increase to help CPU
Core Frequency overclock.
Configuration options: [Auto] [Manual Mode] [Offset Mode]