User’s Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Basic Installation
- Chapter 3: BIOS Setup
- 3.1 Knowing BIOS
- 3.2 BIOS setup program
- 3.3 My Favorites
- 3.4 Main menu
- 3.5 Ai Tweaker menu
- 3.6 Advanced menu
- 3.6.1 Platform Misc Configuration
- 3.6.2 CPU Configuration
- 3.6.3 System Agent (SA) Configuration
- 3.6.4 PCH Configuration
- 3.6.5 PCH Storage Configuration
- 3.6.6 PCH-FW Configuration
- 3.6.7 Onboard Devices Configuration
- 3.6.8 APM Configuration
- 3.6.9 PCI Subsystem Configuration
- 3.6.10 USB Configuration
- 3.6.11 Network Stack Configuration
- 3.6.12 HDD/SSD SMART Information
- 3.7 Monitor menu
- 3.8 Boot menu
- 3.9 Tool menu
- 3.10 Exit menu
- 3.11 Updating BIOS
- Appendix
ROG STRIX B360-I GAMING
1-3
Chapter 1
Refer to 1.1.8 Internal connectors and 2.2.1 Rear I/O connection for more information
about rear panel connectors and internal connectors.
Layout contents
Connectors/Jumpers/Buttons and switches/Slots Page
1. ATX power connectors (24-pin EATXPWR; 8-pin EATX12V) 1-15
2. LGA1151 CPU socket 1-4
3. CPU, AIO, and chassis fan connectors (4-pin CPU_FAN; 4-pin AIO_
PUMP; 4-pin CHA_FAN)
1-14
4. DDR4 DIMM slots 1-5
5. POST State LEDs 1-10
6. RGB LED 1-10
7. Addressable RGB header (4-1 pin ADD_HEADER) 1-9
8. System panel connector (10-1 pin PANEL) 1-16
9. Speaker connector (4-pin SPEAKER) 1-12
10. Intel
®
Serial ATA 6 Gb/s connectors (7-pin SATA6G_12, SATA 6G_34) 1-11
11. USB 3.1 Gen1 connector (20-1 pin U31G1_56) 1-12
12. Clear RTC RAM jumper (2-pin CLRTC)
1-8
13. Thermal sensor cable connector (2-pin T_SENSOR) 1-13
14. Front panel audio connector (10-1 pin AAFP) 1-11
15. USB 2.0 connector (10-1 pin USB910) 1-13
16. RTC Battery header (2-pin BATT_CON)
1-9
17. M.2 sockets (M.2_1; M.2_2) 1-17