User Manual

ROG STRIX B360-H GAMING BIOS Manual
25
Misc.
MRC Fast Boot
Allows you to enable, disable or automatically set the MRC fast boot.
Conguration options: [Auto] [Enabled] [Disabled]
DRAM CLK Period
Conguration options: [Auto] [1] – [58]
Memory Scrambler
Set this item to enable or disable memory scrambler support.
Conguration options: [Enabled] [Disabled]
Channel A DIMM Control
Allows you to enable or disable the Channel A DIMM slots.
Conguration options: [Enable Both DIMMS] [Disable DIMM0] [Disable DIMM1]
[Disable Both DIMMS]
Channel B DIMM Control
Allows you to enable or disable the Channel B DIMM slots.
Conguration options: [Enable Both DIMMS] [Disable DIMM0] [Disable DIMM1]
[Disable Both DIMMS]
MCH Full Check
Enable this item to enhance the stability of your system. Disable this item to enhance
the DRAM performance. Conguration options: [Auto] [Enabled] [Disabled]
Training Profile
Conguration options: [Auto] [Standard Prole] [User Prole]
DLLBwEn
Conguration options: [Auto] [1] - [7]
SPD Write Disable
Conguration options: [TRUE] [FALSE]
DIGI + VRM
CPU Load-line Calibration
Load-line is dened by Intel
®
specication and affects CPU power voltage. The CPU
working voltage decreases proportionally to CPU loading. Higher load-line calibration
could get higher voltage and good processor performance, but increases the CPU and
VRM thermal conditions. Select from levels 1 to 7 to adjust the load-line slope.
Conguration options [Auto] [Default] [Level 1] - [Level 7]
The actual performance boost may vary depending on your CPU specication.
DO NOT remove the thermal module. The thermal conditions should be monitored.