User Manual

ROG STRIX B360-H GAMING
1-9
Chapter 1
1.1.7 Onboard LEDs
1. Q LEDs (CPU, DRAM, VGA, BOOT)
QLEDscheckkeycomponents(CPU,DRAM,VGAcard,andbootingdevices)in
sequenceduringmotherboardbootingprocess.Ifanerrorisfound,thecorresponding
LEDremainslituntiltheproblemissolved.Thisuser-friendlydesignprovidesan
intuitivewaytolocatetherootproblemwithinseconds.
TheQLEDsprovidethemostprobablecauseofanerrorcodeasastartingpointfor
troubleshooting.Theactualcausemayvaryfromcasetocase.
STRIX B360-H GAMING
ROG STRIX B360-H GAMING
CPU/DRAM/BOOT_DEVICE/VGA LED
BOOT (YELLOW GREEN)
CPU (RED)
VGA (WHITE)
DRAM (YELLOW)
2. Standby Power LED
ThemotherboardcomeswithastandbypowerLED.TheLEDlightsuptoindicatethat
thesystemisON,insleepmode,orinsoft-offmode.Thisisareminderthatyoushould
shutdownthesystemandunplugthepowercablebeforeremovingorplugginginany
motherboardcomponent.TheillustrationbelowshowsthelocationoftheonboardLED.
STRIX B360-H GAMING
ROG STRIX B360-H GAMING Standby power LED
SB_PWR
ON
Standby Power
Powered Off
OFF