User Manual

1-12
Chapter 1: Product Introduction
Chapter 1
4. USB 3.1 Gen 1 connector (20-1 pin U31G1_56)
ThisconnectorallowsyoutoconnectaUSB3.1Gen1moduleforadditionalUSB
3.1Gen1frontorrearpanelports.WithaninstalledUSB3.1Gen1module,youcan
enjoyallthebenetsofUSB3.1Gen1includingfasterdatatransferspeedsofupto
5Gbps,fasterchargingtimeforUSB-chargeabledevices,optimizedpowerefciency,
andbackwardcompatibilitywithUSB2.0.
TheUSB3.1Gen1moduleispurchasedseparately.
STRIX B360-H GAMING
ROG STRIX B360-H GAMING USB 3.1 Gen 1 connector
U31G1_56
PIN 1
Vbus
IntA_P1_SSRX-
IntA_P1_SSRX+
GND
IntA_P1_SSTX-
IntA_P1_SSTX+
GND
IntA_P1_D-
IntA_P1_D+
GND
Vbus
IntA_P2_SSRX-
IntA_P2_SSRX+
GND
IntA_P2_SSTX-
IntA_P2_SSTX+
GND
IntA_P2_D-
IntA_P2_D+
DONOTconnecta1394cabletotheUSBconnectors.Doingsowilldamagethe
motherboard!
TheUSB2.0moduleispurchasedseparately.
5. USB 2.0 connectors (10-1 pin USB914, USB1011)
TheseconnectorsareforUSB2.0ports.ConnecttheUSBmodulecabletothese
connectors,theninstallthemoduletoaslotopeningatthebackofthesystemchassis.
ThisUSBconnectorcomplieswithUSB2.0specicationthatsupportsupto480Mb/s
connectionspeed.
STRIX B360-H GAMING
ROG STRIX B360-H GAMING USB2.0 connectors
USB+5V USB_P11- USB_P11+ GND NC
USB+5V
USB_P10-
USB_P10+
GND
USB1011
PIN 1
USB+5V USB_P14- USB_P14+ GND NC
USB+5V
USB_P9-
USB_P9+
GND
USB914
PIN 1