User's Manual
Table Of Contents
- 1 Getting to know your wireless router
- 2 Getting started
- 3 Configuring the General and Advanced Settings
- 3.1 Logging into the Web GUI
- 3.2 Administration
- 3.3 AiCloud 2.0
- 3.4 ASUS AiMesh
- 3.5 AiProtection
- 3.6 Dash Board
- 3.7 Firewall
- 3.8 Game Acceleration
- 3.9 Game Radar
- 3.10 Guest Network Pro
- 3.11 IPv6
- 3.12 LAN
- 3.13 Network Map
- 3.14 Open NAT & Game Profile
- 3.15 Parental Controls
- 3.16 Smart Connect
- 3.17 System Log
- 3.18 Traffic Analyzer
- 3.19 USB Application
- 3.20 VPN
- 3.21 WAN
- 3.22 Wireless
- 4 Utilities
- 5 Troubleshooting
- Appendices
144
How to restore the system to its default settings?
• Go to Administration > Restore/Save/Upload Setting, and
click Restore.
The following are the factory default settings:
User Name: admin
Password: admin
Enable DHCP: Yes (if WAN cable is plugged in)
IP address: http://www.asusrouter.com (or
192.168.50.1)
Domain Name: (Blank)
Subnet Mask: 255.255.255.0
DNS Server 1: 192.168.50.1
DNS Server 2: (Blank)
SSID (2.4GHz): ASUS_XX_2G
SSID (5GHz-1): ASUS_XX_5G-1
SSID (5GHz-2): ASUS_XX_5G-2
SSID (6GHz): ASUS_XX_6G
Firmware upgrade failed.
Launch the rescue mode and run the Firmware Restoration utility.
Refer to section 4.2 Firmware Restoration on how to use the
Firmware Restoration utility.