User's Manual

110
4.10 Administration
4.10.1 Operation Mode
The Operation Mode page allows you to select the appropriate
mode for your network.
To set up the operating mode:
1. From the navigation panel, go to Advanced Settings >
Administration > Operation Mode tab.
2. Select any of these operation modes:
• Wireless router mode / AiMesh Router mode (Default):
In wireless router mode, the wireless router connects to the
Internet and provides Internet access to available devices on
its own local network.
• Access Point(AP) / AiMesh Router in AP mode: In this
mode, the router creates a new wireless network on an
exising network.
• Repeater mode: In Repeater mode, GT-AX6000 wirelessly
connects to an existing wireless network to extend the
wireless coverage. In this mode, the firewall, IP sharing, and
NAT functions are disabled.
• Media Bridge: This setup requires two wireless routers.
The second router serves as a media bridge where multiple
devices such as Smart TVs and gaming consoles can be
connected via ethernet.