User’s Manual

5
2. Raincoat
Thebuilt-inraincoatisatthebottomofthebackpack.
NOTE:ThecontrollerhaspassedthestandardIPX4watersplashenvironmental
test.Usethebuilt-inwater-resistantraincoattoprotectyourbackpackfromrain.
WARNING:
• DONOTremovethenon-detachablecontrollerandcablefromyour
backpack.
• Thisproductshouldonlybeusedinenvironmentwithambient
temperaturesbetween-10°C(14
°F
)and45°C(113
°F
).
• TheLEDmodulemaybecomewarmwhileinuse.DONOTdisconnectyour
LEDmoduleasthismayresultinanelectricshockormalfunction
3. Y cable
Ifyourpowerbankhasonlyoneoutputport,theYcablehelpsyoutocharge
yourdeviceandlightupbackpackatthesametime.
1. Connectthebuilt-inUSBType-Acable(a)toYcable-Type-Acable(b).
2. ConnecttheType-Acable(c)toyourpowerbank.
3. ConnecttheType-Acable(d)tothecableofyourdevice.
Aa
b
c
d
Aa
b
c
d
Aa
b
c
d
Aa
b
c
d
NOTE:TheoutputvoltageoftheUSB2.0USBType-ACableis5V/3A.Fast
chargingfunctiondependsonyourdeviceandpowersource.
POWERBANK
NOTE:Youcandirectlychargeyour
devicewithoutopeningthemain
compartmentofthebackpackby
connectingtheType-Acable(d)to
yourdevicecablethroughacable
managementhole.
inside