E-Manual

12 Chapter 1: Basics
Charging your ROG Phone
Your ROG Phone comes partially charged but you must charge it fully before using it for the first
time. Read the following important notices and cautions before charging your device.
IMPORTANT!
• PeelofftheprotectivefilmontheACpoweradapterandUSBType-Ccablebeforeusingitwithyour
device.
• EnsuretoplugtheACpoweradaptertoacompatiblepoweroutlet.YoucanplugtheACpower
adapter to any compatible 100~240 V outlet.
• TheoutputvoltageoftheACpoweradapterforthisdeviceis+5V-10V 3A, 30W.
• WhenusingyourROGPhonewhileplugged-intoapoweroutlet,thepoweroutletmustbenear
your device and easily accessible.
• Toconserveelectricity,unplugtheACpoweradapterfromthepoweroutletwhennotinuse.
• DonotplaceheavyobjectsontopofyourROGPhone.
CAUTION!
• Whilecharging,yourROGPhonecanbecomewarm.Thisisnormal,however,ifyourdevice
becomes unusually hot, disconnect the USB Type-C cable from your device and send the device,
including the AC power adapter and cable to an ASUS-qualified service personnel.
• TopreventanydamagetoyourROGPhone,ACadapter,orUSBType-Ccable.EnsurethattheUSB
Type-C cable, AC adapter, and your device are connected properly before charging.
To charge your ROG Phone:
1. Connect the USB Type-C cable to the power adapter.
2. Connect the USB Type-C cable to your ROG Phone.
3. Plug the AC power adapter to a grounded power outlet.
3
1
2