E-Manual

11
Chapter 1: Basics
Installing a nano SIM card
Your nano SIM card slots support GSM/GPRS/ EDGE/ CDMA, WCDMA/HSPA+/DC-HSPA+/ TD-SCDMA, FDD-LTE,
and TD-LTE DSDV network bands.
NOTE: To prevent connector damage, ensure to use a standard nano SIM card without a SIM adapter or
the use of a cutter.
CAUTION! Be extra careful when handling a nano SIM card . ASUS is not responsible for any data loss or
damage incurred to your nano SIM cards .
To install a Nano SIM card:
1. Push a pin into the hole on the Nano SIM card tray to eject it. Insert the Nano SIM card(s) into the
card slot(s).
2. Push the tray to close it.
NOTE: Both Nano SIM card slots support GSM/GPRS/ EDGE/ CDMA, WCDMA/HSPA+/DC-HSPA+/ TD-SCDMA, FDD-
LTE, and TD-LTE DSDV network bands. Both Nano SIM cards can connect to VoLTE 4G calling service. But only one
can connect to FDD-LTE, and TD-LTE data service at a time.
CAUTION!
• Do not use sharp tools or solvent on your device to avoid scratches on it .
• Use only a standard Nano SIM card on your ROG Phone.
Nano-SIM1
Nano-SIM2