E-Manual

79 Chapter 10: Maintain your Zen
Setting up ngerprint ID from Settings
To set up your ngerprint ID from Settings:
1. Ensure that the ngerprint scanner and your nger are clean and dry.
2. Launch the Settings screen by doing either of the following:
• Launch Quick Settings then tap
.
• Swipe up on your Home screen then tap Settings.
3. Scroll down the Settings screen and select Security & lock screen > Fingerprint.
4. Unlock your phone if it’s secured. If not, follow the instructions to set up your backup screen lock
method.
5. Tap Add ngerprint (if prompted).
6. Repeatedly place-and-lift your nger on the scanner until your ngerprint is captured.
7. Tap Done to complete the setup.