User Manual

25
Wake-up Devices and Events
Please refer to the table below for devices or specific events that can wake the
computer from specific states.
Devices/events
that wake up the
system…
…from this sleep
state
Comments
Power switch S0iX, S4, S51
RTC alarm S0iX, S4, S51
Option for monitor to remain in
sleep state
LAN S0iX, S4, S51, 3
“S5 WOL after G3” is supported;
monitor to remain in sleep state
WIFI S0iX
Bluetooth S0iX
USB S0iX, S4, S51, 2, 3
Wake S4, S5 controlled by BIOS
option (not after G3)
PCIe S0iX, S41
Via WAKE; monitor to remain in
sleep state
NOTE:
• S0iX represents Microsoft Modern Standby
• S4 implies operating system support only.
• Will not wake from Deep S4/S5. USB S4/S5 Power is controlled by BIOS.
USB S5 wake is controlled by BIOS. USB S4 wake is controlled by OS driver,
not just BIOS option.
• Windows Fast startup will block wake from LAN and USB from S5.
• The use of these wake-up events from an ACPI state requires an operating
system that provides full ACPI support. In addition, software, drivers, and
peripherals must fully support ACPI wake events.