User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Basic Installation
- Chapter 3: BIOS Setup
- 3.1 Knowing BIOS
- 3.2 BIOS setup program
- 3.3 My Favorites
- 3.4 Main menu
- 3.5 Extreme Tweaker menu
- 3.6 Advanced menu
- 3.6.1 CPU Configuration
- 3.6.2 Platform Misc Configuration
- 3.6.3 System Agent (SA) Configuration
- 3.6.4 PCH Configuration
- 3.6.5 PCH Storage Configuration
- 3.6.6 PCH-FW Configuration
- 3.6.7 Thunderbolt(TM) Configuration
- 3.6.8 ROG Effects
- 3.6.9 Onboard Devices Configuration
- 3.6.10 APM Configuration
- 3.6.11 Network Stack Configuration
- 3.6.12 HDD/SSD SMART Information
- 3.6.13 USB Configuration
- 3.6.1 CPU Configuration
- 3.7 Monitor menu
- 3.8 Boot menu
- 3.9 Tool menu
- 3.10 Exit menu
- 3.11 Updating BIOS
- Chapter 4: RAID Support
- Appendix
2-12
Chapter 2: Basic Installation
Chapter 2
2.1.10 3D printing part installation
Installing the 3D printing part onto the 3D Mount
A 3D printing part may be installed onto your motherboard into the 3D Mount shown in the
illustration below.
For more details regarding the installation of the 3D printing part on your motherboard, please
refer to the product page of your motherboard on the ASUS website at www.asus.com.
You may use the screw package included to secure the 3D printing part to the 3D Mount.