User Manual
ROG MAXIMUS XI FORMULA BIOS Manual
53
Front Panel USB Type C Power Mode
[Auto] The system will automatically detect your USB 3.1 Gen 2 Type-C devices
and provide suitable power if needed.
[Enabled] The USB Type C port will always provide power to your USB 3.1 Gen 2
Type-C devices.
Back I/O USB Type C Power Mode
[Auto] The system will automatically detect your USB 3.1 Gen 2 Type-C devices
and provide suitable power if needed.
[Enabled] The USB Type C port will always provide power to your USB 3.1 Gen 2
Type-C devices.
Connectivity mode (Wi-Fi & Bluetooth)
This item allows you to enable or disable the Wi-Fi & Bluetooth connectivity module.
Conguration options: [Disabled] [Enabled]
1.6.8 APM Configuration
ErP Ready
This item allows you to switch off some power at S4+S5 or S5 to get the system ready for
ErP requirement. When set to [Enabled], all other PME options are switched off.
Conguration options: [Disabled] [Enabled (S4+S5)] [Enabled (S5)]
CEC Ready
Enable this option to allow your system to comply with CEC (California Energy Commission)
regulations and save more power under S0 state
Conguration options: [Disabled] [Enabled]
Restore AC Power Loss
This item allows your system to go to ON state, OFF state, or both states after an AC power
loss. When setting your system to [Last State], it goes to the previous state before the AC
power loss.
Conguration options: [Power Off] [Power On] [Last State]