User Manual
52
ROG MAXIMUS XI FORMULA BIOS Manual
LED lighting
When system is in working state
This item allows you to turn the RGB LED lighting on or off when the system is in the
working state.
[All On]: All LEDs (Aura or Functional) will be enabled.
[Aura Only]: Aura LEDs will be enabled and functional LEDs will be disabled.
[Aura Off]: Aura LEDs will be disabled, however functional LEDs will still be
enabled.
[Stealth Mode]: All LEDs (Aura and Functional) will be disabled.
Q-Code LED Function
[Auto] Automatically display POST (Power-On Self-Test) code and CPU
temperature on Q-Code LED.
[POST Code Only] Show POST (Power-On Self-Test) code on Q-Code LED.
When system is in sleep, hibernate or soft off states
This item allows you to turn the RGB LED lighting on or off when the system is in the
sleep, hibernate or soft off states.
[On] LEDs will light up in S3(sleep), S4(hibernate) and S5(soft off)
states.
[Off] LEDs will not light up in S3(sleep), S4(hibernate) and S5(soft off)
states.
M.2_1 Configuration
[Auto] Auto-detects the M.2 device mode. If a SATA device is detected,
SATA6G_2 will be disabled.
[SATA mode] Only supports M.2 SATA devices. Please note that SATA6G_2 port cannot
be used in this mode.
[PCIE mode] Only supports M.2 PCIE devices.
PCIEX16_3 Bandwidth
[X2] Run at X2 mode with SATA6G_56 enabled.
[X4] Run at X4 mode for higher performance with SATA6G_56 disabled.
Hyper M.2 X16: [Disable][Enable]
[Disabled] Only one SSD installed onto the Hyper M.2 X16 card can be detected.
[Enabled] Two or three SSDs installed onto the Hyper M.2 X16 card can be detected.
When Hyper M.2 X16 is set to [Enabled], only the Hyper M.2 X16 Card will be supported
in this slot.
USB power deliver in Soft Off state (S5)
This item allows you to enable or disable USB power when your PC is in the S5 state.
Conīæguration options: [Disabled] [Enabled]