User Manual
Table Of Contents
- 1.1 Knowing BIOS
- 1.2 BIOS setup program
- 1.3 My Favorites
- 1.4 Main menu
- 1.5 Extreme Tweaker menu
- 1.6 Advanced menu
- 1.6.1 Platform Misc Configuration
- 1.6.2 CPU Configuration
- 1.6.3 System Agent (SA) Configuration
- 1.6.4 PCH Configuration
- 1.6.5 PCH Storage Configuration
- 1.6.6 PCH-FW Configuration
- 1.6.7 Thunderbolt(TM) Configuration
- 1.6.8 Onboard Devices Configuration
- 1.6.9 APM Configuration
- 1.6.10 PCI Subsystem Settings
- 1.6.11 USB Configuration
- 1.6.12 Network Stack Configuration
- 1.6.13 NVMe Configuration
- 1.6.14 HDD/SSD SMART Information
- 1.7 Monitor menu
- 1.8 Boot menu
- 1.9 Tool menu
- 1.10 Exit menu
- 1.11 Updating BIOS
60
ROG MAXIMUS XI EXTREME BIOS Manual
The following items appear only when you set Chassis Fan 1-2 Profile to [Manual].
Chassis Fan 1-2 Upper Temperature
Use the <+> or <-> keys to adjust the upper limit of the Chassis Fan 1-2
temperature. The Chassis Fan 1-2 will operate at the maximum duty cycle
when the temperature source is higher than the limit.
Chassis Fan 1-2 Max. Duty Cycle (%)
Use the <+> or <-> keys to adjust the maximum Chassis Fan 1-2 duty
cycle. When the temperature source reaches the upper limit, the Chassis
Fan 1-2 will operate at the maximum duty cycle.
Chassis Fan 1-2 Middle Temperature
Use the <+> or <-> keys to adjust the middle limit of the Chassis Fan 1-2
temperature.
Chassis Fan 1-2 Middle. Duty Cycle (%)
Use the <+> or <-> keys to adjust the Chassis Fan 1-2 middle duty cycle.
Chassis Fan 1-2 Lower Temperature
Use the <+> or <-> keys to adjust the lower limit of the Chassis Fan 1-2
temperature. The Chassis Fan 1-2 will operate at the minimum duty cycle
when the temperature source is lower than the limit.
Chassis Fan 1-2 Min. Duty Cycle(%)
Use the <+> or <-> keys to adjust the minimum Chassis Fan 1-2 duty cycle.
When the temperature source is under the limit, the Chassis Fan 1-2 will
operate at the minimum duty cycle.
RAD1-2 Q-Fan Control
This item allows you to set the Radiator Fan operating mode.
[Auto] Detects the type of radiator fan installed and automatically
switches the control modes.
[PWM Mode] Enables the Radiator Q-Fan Control feature in PWM mode for
4-pin Radiator Fan.
[DC Mode] Enables the Radiator Q-Fan Control feature in DC mode for 3-pin
Radiator Fan.
[Disabled] Disables the Q-Radiator Fan Control.
Radiator Fan 1-2 Q-Fan Source
The assigned fan will be controlled according to the selected temperature source.
Conguration options: [CPU] [MotherBoard] [PCH] [T Sensor] [DIMM.2 Senor 1]
[DIMM.2 Sensor 2] [Water In T Sensor] [Water Out T Sensor] [WB In T Sensor] [WB
Out T Sensor] [EXT_Sensor1] [EXT_Sensor2] [EXT_Sensor3] [Multiple Sources]
• For EXT_Sensor1-2, connect a Thermistor cable to one of these connectors, then
tape the other end on a critical component to control its temperature.
• For Multiple Sources, select up to three temperature sources and the fan will
automatically change based on the highest temperature.