User Manual

ROG MAXIMUS XI EXTREME BIOS Manual
53
1.6.9 APM Configuration
ErP Ready
This item allows you to switch off some power at S4+S5 or S5 to get the system ready for
ErP requirement. When set to [Enabled], all other PME options are switched off.
Conguration options: [Disabled] [Enabled (S4+S5)] [Enabled (S5)]
CEC Ready
Enable this option to allow your system to comply with CEC (California Energy Commission)
regulations and save more power under S0 state
Conguration options: [Disabled] [Enabled]
Restore AC Power Loss
This item allows your system to go to ON state, OFF state, or both states after an AC power
loss. When setting your system to [Last State], it goes to the previous state before the AC
power loss.
Conguration options: [Power Off] [Power On] [Last State]
Power On By PCI-E
This item allows you to enable or disable the Wake-on-LAN function of the onboard LAN
controller or other installed PCI-E LAN cards.
Conguration options: [Disabled] [Enabled]
Power On By RTC
This item allows you to enable or disable the RTC (Real-Time Clock) to generate a wake
event and congure the RTC alarm date. When enabled, you can set the days, hours,
minutes, or seconds to schedule an RTC alarm date.
Conguration options: [Disabled] [Enabled]
Back I/O USB Type C Power Mode
[Auto] The system will automatically detect your USB 3.1 Gen 2 Type-C devices
and provide suitable power if needed.
[Enabled] The USB Type C port will always provide power to your USB 3.1 Gen 2
Type-C devices.
Connectivity mode (Wi-Fi & Bluetooth)
This item allows you to enable or disable the Wi-Fi & Bluetooth connectivity module.
Conguration options: [Disabled] [Enabled]