User’s Manual
Table Of Contents
- 安全性須知
- 第一章 ：產品介紹
- 第二章 ：硬體裝置資訊
- 第三章 ：BIOS 程式設定
- 3.1 認識 BIOS 程式
- 3.2 BIOS 設定程式
- 3.3 我的最愛（My Favorites）
- 3.4 主選單（Main Menu）
- 3.5 Extreme Tweaker 選單（Extreme Tweaker menu）
- 3.6 進階選單（Advanced menu）
- 3.6.1 平台各項設定（Platform Misc Configuration）
- 3.6.2 處理器設定（CPU Configuration）
- 3.6.3 系統代理設定（System Agent Configuration）
- 3.6.4 PCH 設定（PCH Configuration）
- 3.6.5 PCH 儲存裝置設定（PCH Storage Configuration）
- 3.6.6 PCH-FW 設定（PCH-FW Configuration）
- 3.6.7 Thunderbolt(TM) 設定（Thunderbolt(TM) Configuration）
- 3.6.8 內建裝置設定（OnBoard Devices Configuration）
- 3.6.9 進階電源管理設定（APM Configuration）
- 3.6.10 PCI 子系統設定
- 3.6.11 USB 裝置設定（USB Configuration）
- 3.6.12 網路協定堆疊設定（Network Stack Configuration）
- 3.6.13 NVMe 設定（NVMe Configuration）
- 3.6.14 HDD/SSD SMART Information
- 3.7 監控選單（Monitor menu）
- 3.8 啟動選單（Boot menu）
- 3.9 工具選單（Tools menu）
- 3.10 離開 BIOS 程式（Exit menu）
- 3.11 更新 BIOS 程式
- 第四章 ：RAID 支援
- 附錄
A-6
附錄
FCC Compliance Information
Responsible Party: Asus Computer International
Address: 48720 Kato Rd., Fremont, CA 94538, USA
Phone / Fax No: (510)739-3777 / (510)608-4555
Identification of the assembled product: INTEL 9560NGW
Identication of the modular components used in the assembly:
Model Name: 9560NGW FCC ID: PD99560NG
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF exposure warning
This equipment must be installed and operated in accordance with provided instructions
and the antenna(s) used for this transmitter must be installed to provide a separation distance
of at least 20 cm from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter. End-users and installers must be provide with antenna
installation instructions and transmitter operating conditions for satisfying RF exposure
compliance.