User Manual
62
ROG MAXIMUS XI CODE BIOS Manual
The following items appear only when you set High Amp Fan Prole to [Manual].
High Amp Fan Upper Temperature
Use the <+> or <-> keys to adjust the upper limit of the High Amp Fan
temperature. The High Amp Fan will operate at the maximum duty cycle
when the temperature source is higher than the limit.
High Amp Fan Max. Duty Cycle (%)
Use the <+> or <-> keys to adjust the maximum High Amp Fan duty cycle.
When the temperature source reaches the upper limit, the High Amp Fan
will operate at the maximum duty cycle.
High Amp Fan Middle Temperature
Use the <+> or <-> keys to adjust the middle limit of the High Amp Fan
temperature.
High Amp Fan Middle. Duty Cycle (%)
Use the <+> or <-> keys to adjust the High Amp Fan middle duty cycle.
High Amp Fan Lower Temperature
Use the <+> or <-> keys to adjust the lower limit of the High Amp Fan
temperature. The High Amp Fan will operate at the minimum duty cycle
when the temperature source is lower than the limit.
High Amp Fan Min. Duty Cycle (%)
Use the <+> or <-> keys to adjust the minimum High Amp Fan duty cycle.
When the temperature source is under the limit, the High Amp Fan will
operate at the minimum duty cycle.
Ext. Fan(s) Configuration
An ASUS FAN EXTENSION CARD is required to congure these items
Extension Fan 1-3 Q-Fan Control
[Disabled] Disable the Extension Fan Q-Fan control feature.
[DC mode] Enable the Extension Fan Q-Fan control in DC mode for 3-pin
extension fan.
[PWM mode] Enable the Extension Fan Q-Fan control in PWM mode for 4-pin
extension fan.
Extension Fan 1-3 Q-Fan Source
The assigned fan will be controlled according to the selected temperature source.
Conguration options: [CPU] [MotherBoard] [PCH] [T Sensor] [Water In T Sensor]
[Water Out T Sensor] [EXT_Sensor1] [EXT_Sensor2] [EXT_
Sensor3] [Multiple Sources]
• For EXT_Sensor1-3, connect a Thermistor cable to one of these connectors, then
tape the other end on a critical component to control its temperature.
• For Multiple Sources, select up to three temperature sources and the fan will
automatically change based on the highest temperature.