User Manual

ROG MAXIMUS XI CODE BIOS 使用手冊
29
IO Latency RFR delay
CHA RFR delay
設定值有：[Auto] [0] - [127]
CHB RFR delay
設定值有：[Auto] [0] - [127]
Memory Training Algorithms
本選單的項目用來讓您開啟或關閉不同的記憶體訓練演算法。
Early Command Training
設定值有：[Auto] [Enabled] [Disabled]
SenseAmp Offset Training
設定值有：[Enabled] [Disabled]
Early ReadMPR Timing Centering 2D
設定值有：[Enabled] [Disabled]
Read MPR Timing Training
設定值有：[Enabled] [Disabled]
Receive Enable Training
設定值有：[Enabled] [Disabled]
Jedec Write Leveling
設定值有：[Enabled] [Disabled]
Early Write Timing Centering 2D
設定值有：[Auto] [Enabled] [Disabled]
Early Read Timing Centering 2D
設定值有：[Auto] [Enabled] [Disabled]
Write Timing Centering 1D
設定值有：[Enabled] [Disabled]
Write Voltage Centering 1D
設定值有：[Auto] [Enabled] [Disabled]
Read Timing Centering 1D
設定值有：[Auto] [Enabled] [Disabled]
Dimm ODT Training*
設定值有：[Auto] [Enabled] [Disabled]
以下項目只有在 Dimm ODT Training* 設定為 [Auto] 或 [Enabled] 時才會出現。