User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Extreme Tweaker menu
- 6. Advanced menu
- 6.1 Trusted Computing
- 6.2 AMD fTPM configuration
- 6.3 CPU Configuration
- 6.4 PCI Subsystem Settings
- 6.5 USB Configuration
- 6.6 Network Stack Configuration
- 6.7 NVMe Configuration
- 6.8 HDD/SSD SMART Information
- 6.9 SATA Configuration
- 6.10 APM Configuration
- 6.11 Onboard Devices Configuration
- 6.12 NB Configuration
- 6.13 AMD CBS
- 6.14 AMD PBS
- 6.15 AMD Overclocking
- 6.16 RAIDXpert2 Configuration Utility
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
ROG CROSSHAIR X670E Series BIOS Manual
61
Audio Configuration
This item allows you to configure Audio Configuration.
NB Azalia
Allows you to enable or disable the integrated HD audio controller.
Configuration options: [Disabled] [Enabled] [Auto]
Audio IOs
Configuration options: [Auto] [HDA(3SDI) + PDM(2CH)(Default)] [HDA (1SDI)
+ PDM(6CH)] [HDA(1SDI) + SW0(1MDATA) + PDM(2CH)] [SW0(4MDATA) +
PDM(6CH)] [SW0(4MDATA) + SW1(1MDATA) + PDM(2CH)]
PCIe loopback Mode
Allows you to enable or disable PcieLoopBackMode.
Configuration options: [Auto] [Disabled] [Enabled]
SMU Common Options
TDP Control
[Auto] Use the default sustained power limit.
[Manual] User can set customized sustained power limit.
The following item appears only when TDP Control is set to [Manual].
TDP
Allows you to set the sustained power limit [mW].
PPT Control
[Auto] Use the default PPT Limits.
[Manual] User can set customized PPT Limits.
The following item appears only when PPT Control is set to [Manual].
PPT
Allows you to set the PPT [mW].
Thermal Control
[Auto] Use the default TctlMax.
[Manual] User can set customized TctlMax.
The following item appears only when Thermal Control is set to [Manual].
TjMax
Allows you to set the maximum operating temperature [‘C] (IRM limit will be enforced).
TDC Control
[Auto] Use the default TDC Limits.
[Manual] User can set customized TDC Limits.
The following item appears only when TDC Control is set to [Manual].
TDC_VDDCR_VDD
Allows you to set the VDDCR_VDD TDC Limit [mA] (IRM limit will be enforced).
EDC Control
[Auto] Use the default EDC Limits.
[Manual] User can set customized EDC Limits.