User Manual

60
ROG CROSSHAIR X670E Series BIOS Manual
The following items appear only when MBIST Enable is set to [Enabled].
MBIST Test Mode
Allows you to select the MBIST Test Mode - Interface Mode (Tests Single and
Multiple CS transactions and Basic Connectivity) or Data Eye Mode (Measures
Voltage vs. Timing).
Configuration options: [Interface Mode] [Data Eye Mode] [Both] [Auto]
MBIST Aggressors
Configuration options: [Disabled] [Enabled] [Auto]
MBIST Per Bit Slave Die Reporting
Reports 2D Data Eye Results in ABL Log for each DQ, Chipselect, and
Channel.
Configuration options: [Disabled] [Enabled] [Auto]
DDR Data Eye
Pattern Select
Configuration options: [PRBS] [SSO] [Both]
Pattern Length
This token helps to determine the pattern length. The possible options
are N=3...12.
Configuration options: [3] - [9]
Aggressor Channel
This helps read the aggressors channels. If set to [Enabled], you can
read from one or more than one aggressor channel. The default is set
to [Disabled].
Configuration options: [Disabled] [1 Aggressor Channel] [3 Aggressor
Channels] [7 Aggressor Channels]
DDR Memory Features
This item allows you to configure DDR Memory Features.
Memory Context Restore
Allows you to configure the memory context restore mode. When enabled,
DRAM re-training is avoided when possible and the POST latency is
minimized.
Configuration options: [Auto] [Enabled] [Disabled]
NBIO Common Options
PCIe ARI Support
Configuration options: [Disabled] [Enabled] [Auto]
PCIe ARI Enumeration
Allows you to enable or disable ARI forwarding for each downstream port.
Configuration options: [Disabled] [Enabled] [Auto]
PSPP Policy
Configuration options: [Disabled] [Balanced] [Auto]
GFX Configuration
This item allows you to configure GFX Configuration.
UMA
Version
[Legacy] UMA Legacy Version
[Non-Legacy] UMA Non-Legacy Version
[Auto] Hybrid Secure
GPU Host Translation Cache
Configuration options: [Disabled] [Enabled] [Auto]]