User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Extreme Tweaker menu
- 6. Advanced menu
- 6.1 Trusted Computing
- 6.2 AMD fTPM configuration
- 6.3 CPU Configuration
- 6.4 PCI Subsystem Settings
- 6.5 USB Configuration
- 6.6 Network Stack Configuration
- 6.7 NVMe Configuration
- 6.8 HDD/SSD SMART Information
- 6.9 SATA Configuration
- 6.10 APM Configuration
- 6.11 Onboard Devices Configuration
- 6.12 NB Configuration
- 6.13 AMD CBS
- 6.14 AMD PBS
- 6.15 AMD Overclocking
- 6.16 RAIDXpert2 Configuration Utility
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
48
ROG CROSSHAIR X670E Series BIOS Manual
Intel LAN Controller
Configuration options: [Disabled] [Enabled]
10G LAN Card
Configuration options: [Disabled] [Enabled]
USB power delivery in Soft Off state (S5)
Allows you to enable or disable USB power when your PC is in the S5 state.
Configuration options: [Disabled] [Enabled]
U32G2_C3 Type C Power Mode
[Auto] Power will be provided to USB 3.2 Gen 2 Type-C ports automatically when
a device is detected.
[Enable] Power will always be on for USB 3.2 Gen 2 Type-C ports.
Improper connection may damage the system permanently.
Serial Port Configuration
This submenu allows you to set parameters for Serial Port.
This item will only function if there is a serial port (COM) connector on your motherboard.
Serial Port
Allows you to enable or disable the Serial port.
Configuration options: [Enabled] [Disabled]
The following item appears only when Serial Port is set to [Enabled].
Change settings
Allows you to select an optimal setting for super IO device.
Configuration options: [IO=3F8h; IRQ=4] [IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4]
[IO=2E8h; IRQ=3]
ASM1061 Configuration
This submenu allows you to set parameters for ASM1061 controller.
ASMedia Storage Controller
Configuration options: [Disabled] [Enabled]
Windows Hot-plug Notification
Configuration options: [Disabled] [Enabled]
ASPM Support
Configuration options: [Disabled] [Enabled]
PCIE Link Speed
This submenu allows you to set parameters for PCIE Link Speed.
The settings and options in this submenu may vary depending on your motherboard.
Please refer to the BIOS of your motherboard for the actual settings and options.