User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Extreme Tweaker menu
- 6. Advanced menu
- 6.1 Trusted Computing
- 6.2 AMD fTPM configuration
- 6.3 CPU Configuration
- 6.4 PCI Subsystem Settings
- 6.5 USB Configuration
- 6.6 Network Stack Configuration
- 6.7 NVMe Configuration
- 6.8 HDD/SSD SMART Information
- 6.9 SATA Configuration
- 6.10 APM Configuration
- 6.11 Onboard Devices Configuration
- 6.12 NB Configuration
- 6.13 AMD CBS
- 6.14 AMD PBS
- 6.15 AMD Overclocking
- 6.16 RAIDXpert2 Configuration Utility
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
26
ROG CROSSHAIR X670E Series BIOS Manual
The following item appears only when Voltage Floor Mode is set to [Static].
Voltage Floor
Boosts output to keep voltage above this level, efficacy up to 0.3v. Use the <+> or
<-> to adjust the value. The values range from 0.000V to 1.700V with an interval of
0.00625V.
Configuration options: [Auto] [0.00000] - [1.70000]
The following items appear only when Voltage Floor Mode is set to [Dynamic].
Floor Low VMin
The lowest minimum voltage point that maps to Floor Hot Temp should the processor
temperature move to hotter or equal to Floor Hot Temp. Use the <+> or <-> to adjust
the value. The values range from 0.000V to 1.700V with an interval of 0.00625V.
[Auto] is 1.05V.
Configuration options: [Auto] [0.00000] - [1.70000]
Floor Hot Temp
The hottest temperature point that maps to Floor Low VMin should the processor
temperature move to hotter or equal to Floor Hot Temp. Use the <+> or <-> to adjust
the value.
[Auto] is 95C.
Configuration options: [Auto] [0] - [255]
Floor High VMin
The highest minimum voltage point that maps to Floor Cold Temp should the
processor temperature move to colder or equal to Floor Cold Temp. Use the <+> or
<-> to adjust the value. The values range from 0.000V to 1.700V with an interval of
0.00625V.
[Auto] is 1.30V.
Configuration options: [Auto] [0.00000] - [1.70000]
Floor Hot Temp
The coldest temperature point that maps to Floor High VMin should the processor
temperature move to colder or equal to Floor Cold Temp. Use the <+> or <-> to adjust
the value.
[Auto] is 50C.
Configuration options: [Auto] [0] - [255]
Voltage ceiling Mode
[Static]
Fixed maximum voltage.
[Dynamic] Customized maximum voltage that actively moves based on
CPU temperature.
The following item appears only when Voltage ceiling Mode is set to [Static].
Voltage ceiling
Suppresses output to keep voltage below this level, efficacy up to 0.3v. Use the <+>
or <-> to adjust the value. The values range from 0.000V to 3.000V with an interval of
0.00625V.
Configuration options: [Auto] [0.00000] - [3.00000]