User's Manual

ASUS ROG Armoury18
Calibration
Load default
settings
Save changes made to
selected profile
Enable surface
calibration options
Adjust the surface
calibration distance
Using Preset Surfaces
1. Select Preset Surfaces, then select a surface material from the list.
2. Click on SAVE to save the changes made.
Using Manual Calibration
1. Select Manual Calibrations, then click START.
2. Move your mouse across the surface for a few seconds until the cursor starts to
move on your screen.
For more accurate calibrations, use large movements when moving your mouse across
the surface.
3. Once the manual calibration is completed, click on OK.
4. Click on SAVE to save the changes made.