User manual

3.2 Creating a multi-point route
(available in Advanced mode only)
1. Multi-point routes are extended from single routes, so a route must be active first.
2. Select another point as you did in the previous sections. This will be the additional
destination in the route.
3. The map appears with the selected point in the middle, and the Cursor menu opens
automatically.
4. Tap
to open the full Cursor menu with the additional functions.
5. Now add the new point to the existing route:
• Tap
to add the point as an intermediate destination preceding
the final destination of the route.
• Tap
to add the point as a new final destination demoting the
previous one to the last intermediate destination.
6. [optional] To add more points to the route, repeat the above steps as many times as you
like.
Every time a new point is added, the route is recalculated automatically, and you can start
navigating right away.
3.3 Watching the simulation of a route
(available in Advanced mode only)
The procedure is explained starting from the Cockpit screen.
1. Tap the following buttons:
, .
2. The Route menu appears. There are two ways of running the route simulation:
• Tap
to run the simulation at high speed to give you a quick overview
of the route.
• Tap
to run the simulation at normal speed and with voice guidance
instructions announced. This option is for demonstration purposes, or for checking
difficult parts of the route in advance.
3. The simulation can be aborted any time by tapping the
button.