User manual

3.1.5 Selecting the destination or a waypoint from the History
The destinations that you have set earlier appear in the History.
The procedure is explained starting from the Navigation menu.
1. Tap the following buttons:
(Simple mode), or ,
(Advanced mode).
2. If necessary, turn the page to see earlier destinations with the arrow buttons.
3. Tap the desired item.
4. The map appears with the selected point in the middle. Tap
(Simple
mode) or
(Advanced mode) from the Cursor menu. The route is then
automatically calculated, and you can start navigating.
3.1.6 Selecting the destination by entering its coordinates
(available in Advanced mode only)
The procedure is explained starting from the Navigation menu.
1. Tap the following buttons:
, .
2. (optional) Tap
to change the format of the displayed coordinates.
3. Tap the latitude or longitude value to change the coordinates:
1. Select the coordinate system: tap WGS84 or UTM.
2. Enter the coordinate values:
• In WGS84: the latitude (N or S) and the longitude (E or W)
• In UTM: the number and the letter of the zone, and the X Y coordinates
4. Tap the
button.
5. The map appears with the selected point in the middle. Tap
(Simple
mode) or
(Advanced mode) from the Cursor menu. The route is then
automatically calculated, and you can start navigating.