User manual

2.6.3 Selected location on the map (Cursor)
If you tap the map, the Cursor appears at the selected point on the map. ASUS GO displays the
Cursor with a red dot and radiating red circles to make it visible at all zoom levels, even when it is
in the background of a 3D map view.
When the Cursor is set, tap
. The Cursor menu appears and you can use the Cursor as one
of the following:
• the starting point of a route (tap
)
• a via point in a route (tap
)
• the destination of a route (tap
if there is no active route, or tap
if a route already exists)
You can save the location of the Cursor as:
• a Favourite, tap
.
• a speed camera, tap
.
• a POI, tap
.
• a map marker Pin (page 12), tap
.
2.6.4 Return to GPS position
When the Cursor on the map is not at your GPS position, the button is visible. Tap it
to move the displayed map segment to the GPS position.
Note!
Even if you move the map while you are driving, ASUS GO continues navigating i
f
there is an active route: it plays the voice instructions and displays the turn preview
icons according to your actual GPS position.