UltraMobilePC (UMPC) Hardware User’s Manual 1.3M PIXELS 1.
UltraMobilePC Table of Contents Table of Contents 1.
UltraMobilePC 4.
UltraMobilePC
UltraMobilePC 1. Introducing the UltraMobilePC About This User’s Manual Notes For This Manual Safety Precautions Preparing your UltraMobilePC NOTE: Photos and icons in this manual are used for artistic purposes only and do not show what is actually used in the product itself.
UltraMobilePC About This User’s Manual You are reading the UltraMobilePC User’s Manual. This User’s Manual provides information on the various components in the UltraMobilePC and how to use them. The following are major sections of this User’s Manuals: 1. Introducing the UltraMobilePC Introduces you to the UltraMobilePC and this User’s Manual. 2. Knowing the Parts Gives you information on the UltraMobilePC’s components. 3. Getting Started Gives you information on getting started with the UltraMobilePC. 4.
UltraMobilePC Safety Precautions The following safety precautions will increase the life of the UltraMobilePC. Follow all precautions and instructions. Except as described in this manual, refer all servicing to qualified personnel. Do not use damaged power cords, accessories, or other peripherals. Do not use strong solvents such as thinners, benzene, or other chemicals on or near the surface. IMPORTANT! Disconnect the AC power and remove the battery pack(s) before cleaning.
UltraMobilePC Transportation Precautions To prepare the UltraMobilePC for transport, you should turn it OFF and disconnect all external peripherals to prevent damage to the connectors. The hard disk drive’s head retracts when the power is turned OFF to prevent scratching of the hard disk surface during transport. Therefore, you should not transport the UltraMobilePC while the power is still ON.
UltraMobilePC Preparing your UltraMobilePC These are only quick instructions for using your UltraMobilePC. Read the later pages for detailed information on using your UltraMobilePC. 1. Install the battery pack 2. Connect the AC Power Adapter 2 1 3 3. Remove the Tablet Pen 4. Turn ON the UltraMobilePC 1.3M PIXELS Extend the Tablet Pen as shown. AV-OUT HOLD WIRELESS LOGIN POWER Then Tablet Pen can be inserted in the extended Slide the power switch and release.
UltraMobilePC 10
UltraMobilePC 2. Knowing the Parts Basic sides of the UltraMobilePC NOTE: Photos and icons in this manual are used for artistic purposes only and do not show what is actually used in the product itself.
UltraMobilePC Front Side Refer to the diagram below to identify the components on this side of the UltraMobilePC. 1 2 3 12 4 11 10 5 9 8 6 7 1 Display Panel 2 Camera 3 Microphone (Built-in) 4 Thumbstick Cursor Control 12 The display panel functions the same as a desktop monitor. The UltraMobilePC uses an active matrix TFT LCD, which provides excellent viewing like that of desktop monitors.
UltraMobilePC 5 Page Up & Page Down 6 UltraMobilePC Settings Button 7 Status Indicators 8 Audio Speaker 9 Microsoft Touch Pack Key 10 Direction & Enter Buttons 11 Thumbstick Cursor Buttons 12 Fingerprint Scanner The Page Up and Page Down buttons act the same way as those on a keyboard. The UltraMobilePC settings button bring up an easy menu to customize the UltraMobilePC to your desire. Status indicators represent various conditions. Details are described in section 3.
UltraMobilePC Right Side Refer to the diagram below to identify the components on this side of the UltraMobilePC. 1 2 3 4 5 6 LAN Port (disabled when using PortBar) 1 The RJ-45 LAN port with eight pins is larger than the RJ-11 modem port and supports a standard Ethernet cable for connection to a local network. The built-in connector allows convenient use without additional adapters. Note: An active LAN cable must be connected in order for Windows device manager to detect the built-in LAN.
UltraMobilePC 3 2.0 USB Port (2.0/1.1) The USB (Universal Serial Bus) port is compatible with USB 2.0 or USB 1.1 devices such as keyboards, pointing devices, cameras, hard disk drives, printers, and scanners connected in a series up to 12Mbits/sec (USB 1.1) and 480Mbits/sec (USB 2.0). USB allows many devices to run simultaneously on a single computer, with some peripherals acting as additional plug-in sites or hubs.
UltraMobilePC Top Side Refer to the diagram below to identify the components on this side of the UltraMobilePC. 1 1 AV-OUT HOLD WIRELESS LOGIN POWER 2 3 2.0 AV-OUT HOLD WIRELESS LOGIN POWER 4 2 3 4 5 6 7 AV-OUT Audio/Video output port for connection to analog audio/video devices such as televisions or video recorders. USB Port (2.0/1.1) The USB (Universal Serial Bus) port is compatible with USB 2.0 or USB 1.
UltraMobilePC AV-OUT HOLD 6 WIRELESS LOGIN POWER AV-OUT HOLD 7 WIRELESS LOGIN POWER AV-OUT HOLD 8 WIRELESS LOGIN POWER Wireless Switch Enables or disables the built-in wireless LAN and Bluetooth (selected models). When enabled, the wireless status indicator will light. Windows software settings are necessary before use.
UltraMobilePC Left Side Refer to the diagram below to identify the components on this side of the UltraMobilePC. 1 1 2 18 Mini-USB Port (Type A) 2 LOCK F2 F3 The mini-USB (Universal Serial Bus) port is for connection to the optional external USB keyboard. Wrist strap hook UNLOCK PrtSc F1 The wrist strap hook is for use with the wrist strap to prevent accidentally dropping the UltraMobilePC when holding it in your hands.
UltraMobilePC Bottom Side Refer to the diagram below to identify the components on this side of the UltraMobilePC. 1 1 Battery Lock - Spring 2 Battery Pack 3 Battery Lock - Manual 2 3 The spring battery lock is used to keep the battery pack secured. When the battery pack is inserted, it will automatically lock. To remove the battery pack, this spring lock must be held in the unlocked position.
UltraMobilePC Back Side Refer to the diagram below to identify the components on this side of the UltraMobilePC. 2 1 3 1 Battery Pack 2 GPS Antenna (built-in) 3 Touchscreen Pen Compartment 20 The battery pack is automatically charged when the UltraMobilePC is connected to an AC power source and maintains power to the UltraMobilePC when AC power is not connected. This allows use when moving temporarily between locations.
UltraMobilePC 3. Getting Started Using AC Power Using Battery Power Powering ON the UltraMobilePC Checking Battery Power Restarting or Rebooting Powering OFF the UltraMobilePC Status Indicators NOTE: Photos and icons in this manual are used for artistic purposes only and do not show what is actually used in the product itself.
UltraMobilePC Power System Using AC Power The UltraMobilePC power is comprised of two parts, the power adapter and the battery power system. The power adapter converts AC power from a wall outlet to the DC power required by the UltraMobilePC. Your UltraMobilePC comes with a universal AC-DC adapter. That means that you may connect the power cord to any 100V-120V as well as 220V-240V outlets without setting switches or using power converters.
UltraMobilePC Using Battery Power The UltraMobilePC is designed to work with a removable battery pack. The battery pack consists of a set of battery cells housed together. A fully charged pack will provide several hours of battery life, which can be further extended by using power management features through the BIOS setup. Additional battery packs are optional and can be purchased separately through a retailer.
UltraMobilePC Powering ON the UltraMobilePC The UltraMobilePC’s power-ON message appears on the screen when you turn it ON. If necessary, you may adjust the brightness by using the hotkey. If you need to run the BIOS Setup to set or modify the system configuration, press [F2] upon bootup to enter the BIOS Setup. If you press [Tab] during the splash screen, standard boot information such as the BIOS version can be seen.
UltraMobilePC Checking Battery Power The battery system implements the Smart Battery standard under the Windows environment, which allows the battery to accurately report the amount of charge left in the battery. A fully-charged battery pack provides the Notebook PC a few hours of working power. But the actual figure varies depending on how you use the power saving features, your general work habits, the CPU, system memory size, and the size of the display panel.
UltraMobilePC Charging the Battery Pack Before you use your UltraMobilePC on the road, you will have to charge the battery pack. The battery pack begins to charge as soon as the UltraMobilePC is connected to external power using the power adapter. Fully charge the battery pack before using it for the first time. A new battery pack must completely charge before the UltraMobilePC is disconnected from external power.
UltraMobilePC Power Management Modes The Notebook PC has a number of automatic or adjustable power saving features that you can use to maximize battery life and lower Total Cost of Ownership (TCO). You can control some of these features through the Power menu in the BIOS Setup. ACPI power management settings are made through the operating system.
UltraMobilePC Status Indicators Power Indicator The power indicator lights when the UltraMobilePC is turned ON and blinks slowly when the UltraMobilePC is in the Suspend-to-RAM (Standby) mode. This indicator is OFF when the UltraMobilePC is turned OFF or in the Suspend-to-Disk (Hibernation) mode. Battery Charge Indicator The battery charge indicator shows the status of the battery’s power as follows: ON: The UltraMobilePC’s battery is charging when AC power is connected.
UltraMobilePC 4. Using the UltraMobilePC Display Calibration Connections Network Connection Wireless LAN Connection Bluetooth Wireless Connection Power Management Modes Fingerprint Scanner GPS Software NOTE: Photos and icons in this manual are used for artistic purposes only and do not show what is actually used in the product itself.
UltraMobilePC Display Calibration (Vista) 1. Launch Control Panel from Windows 2. Double click Tablet PC Settings icon. Start. 3. Click the Calibrate button on the “General” 4. Carefully tap the center of each cross hair page. that appears to complete the calibration process.
UltraMobilePC Display Calibration (XP) 1. Double click the TouchSet Utility icon on 2. Or launch TouchSet Utility through Winthe desktop. dows Start. 3. Click the Calibration tab and click the Cali- 4. Carefully tap the center of each cross hair brating Now button. that appears to complete the calibration process.
UltraMobilePC Connections Network Connection Connect a network cable, with RJ-45 connectors on each end, to the modem/network port on the Notebook PC and the other end to a hub or switch. For 100 BASE-TX / 1000 BASE-T speeds, your network cable must be category 5 or better (not category 3) with twisted-pair wiring. If you plan on running the interface at 100/1000Mbps, it must be connected to a 100 BASE-TX / 1000 BASE-T hub (not a BASE-T4 hub). For 10Base-T, use category 3, 4, or 5 twisted-pair wiring.
UltraMobilePC Wireless LAN Connection (on selected models) The optional built-in wireless LAN is a compact easy-to-use wireless Ethernet adapter. Implementing the IEEE 802.11 standard for wireless LAN (WLAN), the optional built-in wireless LAN is capable of fast data transmission rates using Direct Sequence Spread Spectrum (DSSS) and Orthogonal Frequency Division Multiplexing (OFDM) technologies on 2.4GHz/5GHz frequencies.
UltraMobilePC Windows Wireless Network Connection Connecting to a network (Vista) 1. Press [WIRELESS] switch repeatedly until Wireless LAN ON or WLAN & Bluetooth ON is shown. 1b. Or double click the Wireless Console icon on the taskbar and select either the 1st icon to activate both Wireless & Bluetooth, or select the 2nd icon for Wireless activation only. 2. You should see the “Not Connected” network icon. 3. Right click on the network icon and select Connect to a network. 4.
UltraMobilePC Windows Wireless Network Connection Connecting to a network (XP) Using Windows XP wireless settings require that you select this option in the ASUS WLAN Control Center. 1. Press [WIRELESS] switch repeatedly until 1b. Or double click the Wireless Console icon Wireless LAN ON or WLAN & Bluetooth on the taskbar and click on the 1st icon to ON is shown. activate both Wireless & Bluetooth, or select the 2nd icon for Wireless activation only. 2. Double click the WLAN icon on the task- 3.
UltraMobilePC ASUS Wireless LAN (on selected models) Connecting to a network Using ASUS wireless settings require that you select this option in the ASUS WLAN Control Center. 1. Press [WIRELESS] switch repeatedly until 1b. Or double click the Wireless Console icon Wireless LAN ON or WLAN & Bluetooth on the taskbar and click on the 1st icon to ON is shown. activate both Wireless & Bluetooth, or select the 2nd icon for Wireless activation only. 2. Double click the icon on the desktop or click 3.
UltraMobilePC ASUS Wireless LAN (on selected models) Connecting to a network (cont.) 6. Click the Encryption tab to configure the 7. The Status tab will show connection status Network Authentication mode and Passand details. word. Note: Click “Save Configuration” and “Save” to remember settings for this network.
UltraMobilePC Bluetooth Wireless Connection (on selected models) Notebook PCs with Bluetooth technology eliminates the need for cables for connecting Bluetooth-enabled devices. Examples of Bluetooth-enabled devices may be Notebook PCs, Desktop PCs, mobile phones, and PDAs. Note: If your Notebook PC did not come with built-in Bluetooth, you need to connect a USB or ExpressCard Bluetooth module in order to use Bluetooth. Bluetooth-enabled mobile phones You can wireless connect to your mobile phone.
UltraMobilePC Fingerprint Registration (on selected models) The fingerprint scanner can be used for instant and secure user authentication. These instructions will show you how to setup the fingerprint registration. 1. This wizard will automatically start when 2. Select “Fingerprints” and click Next. TPM is enabled in BIOS after setting security passwords. Click Next to continue. 3. Select a finger on the diagram. Swipe the 4. You must register at least two fingers to decrease the chance of problems.
UltraMobilePC Fingerprint Registration (on selected models) cont. 5. Select a finger on the diagram and swipe the corresponding finger on the scanner slowly. You must swipe your finger multiple times for verification. You must register at least two fingers to decrease the chance of any problems. 6. Click Finish when done. 7. Right-click the icon on the taskbar and select “Settings and Options”. 8. Select “General Options” and “Single Sign On” and configure your preferences.
UltraMobilePC GPS Software The included software may be used with the built-in GPS system. Choose Tools | GPS | Configure GPS Receiver..., select COM2, and click OK. Select Tools | GPS | Start GPS Tracking. The GPS Sensor will acquire information for these fields once a satellite fix is acquired.
UltraMobilePC 42
UltraMobilePC Appendix Optional Accessories Optional Connections Glossary Declarations and Safety Statements UltraMobilePC Information NOTE: Photos and icons in this manual are used for artistic purposes only and do not show what is actually used in the product itself.
UltraMobilePC Optional Accessories These items, if desired, come as optional items to complement your UltraMobilePC. Foldable USB Keyboard MiniUSB Port Slide latch to open. LOCK UNLOCK PrtSc F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F1 F11 F12 F1 SysRq Pause Break PgUp Home PgDn End Slide latch on the top to lock the keyboard in the open position. Extend: Pull the USB connectors apart (not fully) to extend the mini-USB cable. (Note: If you pull too much, it will retract.
UltraMobilePC PortBar Notes: (1) AC power adapter must be used. Cannot be used when UltraMobilePC is in battery mode. (2) Recommend using two AC power adapters (one on the UltraMobilePC and one on the PortBar) when using all ports on UltraMobilePC and PortBar. (3) Disables UltraMobilePC’s LAN port when connected.
UltraMobilePC PortBar (Cont.) Plug the PortBar to the expansion port. Keep the PortBar connector in the keeper when not in use to protect the contacts. Plug the UltraMobilePC’s power adapter into this power port so that you can easily free the UltraMobilePC from all your peripherals with just one connector. WARNING! You must plug the power adapter into the UltraMobilePC or PortBar when you use PortBar. The PortBar must not be used when the UltraMobilePC is operating in battery mode.
UltraMobilePC More Optional Accessories These items, if desired, come as optional items to complement your UltraMobilePC. USB Hub (Optional) Attaching an optional USB hub will increase your USB ports and allow you to quickly connect or disconnect many USB peripherals through a single cable. USB Flash Memory Disk A USB flash memory disk is an optional item that can replace the 1.44MB floppy disk and provide storage up to several hundred megabytes, higher transfer speeds, and greater durability.
UltraMobilePC Optional Connections These items, if desired, may be purchased from third-parties. Printer Connection One or more USB printers can be simultaneously used on any USB port or USB hub.
UltraMobilePC Bluetooth Mouse Setup (optional) This process can be used to add most Bluetooth devices in Windows operating system. 1. Press [WIRELESS] switch repeatedly until 1b. Or double click the Wireless Console icon on Bluetooth ON or WLAN & Bluetooth ON the taskbar and select either the 1st icon to is shown. activate both Wireless & Bluetooth, or select the 3rd icon for Bluetooth activation only. ESET OFF ON 2b. Or Launch Bluetooth Devices from the Windows Control Panel. R 2.
UltraMobilePC Bluetooth Mouse Setup (optional) cont. 4. Click Next when the Bluetooth mouse is ready. 5. A list of nearby Bluetooth devices will be shown. Select the Bluetooth mouse and click Next. 6. Select “Don’t use a passkey” and click Next. 7. Wait while the Bluetooth mouse is being added. 8. Click Finish when adding is complete. 9. You will see your device in the window. You can also add or remove Bluetooth devices here. Note: “RESET” may be necessary after changing batteries.
UltraMobilePC Operating System and Software This Notebook PC may offer (depending on territory) its customers the choice of a pre-installed Microsoft Windows operating system. The choices and languages will depend on the territory. The levels of hardware and software support may vary depending on the installed operating system. The stability and compatibility of other operating systems cannot be guaranteed.
UltraMobilePC Glossary ACPI (Advanced Configuration and Power Management Interface) Modern standard for reducing power usage in computers. APM (Advanced Power Management) Modern standard for reducing power usage in computers. AWG (American Wire Gauge) NOTE: This table is for general reference only and should not be used as a source of the American Wire Gauge standard as this table may not be current or complete. Gauge AWG 33 32 30 29 27 26 25 Diam (mm) 0.18 0.19 0.20 0.25 0.30 0.35 0.40 0.
UltraMobilePC Byte (Binary Term) One byte is a group of eight contiguous bits. A byte is used to represent a single alphanumeric character, punctuation mark, or other symbol. Clock Throttling Chipset function which allows the processor’s clock to be stopped and started at a known duty cycle. Clock throttling is used for power savings, thermal management, and reducing processing speed. CPU (Central Processing Unit) The CPU, sometimes called “Processor,” actually functions as the “brain” of the computer.
UltraMobilePC RAM (Random Access Memory) RAM (usually just called memory) is the place in a computer where the operating system, application programs, and data in current use are temporarily kept so that they can be quickly reached by the computer’s processor instead of having to read from and write to slower storage such as the hard disk or optical disc. Standby Mode A power mode that enables a computer to save power consumption while not in use.
UltraMobilePC Certifications Federal Communications Commission Statement This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received, including interference that may cause undesired operation.
UltraMobilePC FCC Radio Frequency Interference Requirements This device is restricted to INDOOR USE due to its operation in the 5.15 to 5.25GHz frequency range. FCC requires this product to be used indoors for the frequency range 5.15 to 5.25GHz to reduce the potential for harmful interference to co-channel of the Mobile Satellite Systems. High power radars are allocated as primary user of the 5.25 to 5.35GHz and 5.65 to 5.85GHz bands.
UltraMobilePC CE Mark Warning This is a Class B product, in a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. IC Radiation Exposure Statement for Canada This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. To maintain compliance with IC RF exposure compliance requirements, please avoid direct contact to the transmitting antenna during transmitting.
UltraMobilePC Wireless Operation Channel for Different Domains N. America Japan Europe ETSI 2.412-2.462 GHz 2.412-2.484 GHz 2.412-2.472 GHz Ch01 through CH11 Ch01 through Ch14 Ch01 through Ch13 France Restricted Wireless Frequency Bands Some areas of France have a restricted frequency band. The worst case maximum authorized power indoors are: • • 10mW for the entire 2.4 GHz band (2400 MHz–2483.5 MHz) 100mW for frequencies between 2446.5 MHz and 2483.
UltraMobilePC UL Safety Notices Required for UL 1459 covering telecommunications (telephone) equipment intended to be electrically connected to a telecommunication network that has an operating voltage to ground that does not exceed 200V peak, 300V peak-to-peak, and 105V rms, and installed or used in accordance with the National Electrical Code (NFPA 70).
UltraMobilePC Nordic Lithium Cautions (for lithium-ion batteries) CAUTION! Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. (English) ATTENZIONE! Rischio di esplosione della batteria se sostituita in modo errato. Sostituire la batteria con un una di tipo uguale o equivalente consigliata dalla fabbrica. Non disperdere le batterie nell’ambiente.
