User Manual

This equipment must be installed and operated in accordance with
provided instructions and the antenna(s) used for this transmitter must
be installed to provide a separation distance of at least 20 cm from all
persons and must not be co-located or operating in conjunction with
any other antenna or transmitter. End-users and installers must be
provide with antenna installation instructions and transmitter operating
conditions for satisfying RF exposure compliance.
RF exposure warning
Safety information
Your system is designed and tested to meet the latest standards of safety
for information technology equipment. However, to ensure your safety,
it is important that you read the following safety instructions.
Setting up your system
• Read and follow all instructions in the documentation before you operate
your system.
• Do not use this product near water or a heated source.
• Set up the system on a stable surface.
• Openings on the chassis are for ventilation. Do not block or cover these
openings. Make sure you leave plenty of space around the system for
ventilation. Never insert objects of any kind into the ventilation openings.
• Use this product in environments with ambient temperatures between
0˚C and 35˚C.
• If you use an extension cord, make sure that the total ampere rating of
the devices plugged into the extension cord does not exceed its ampere
rating.
Care during use
• Do not walk on the power cord or allow anything to rest on it.
• Do not spill water or any other liquids on your system.
• When the system is turned off, a small amount of electrical current still
flows. Always unplug the power cord from the power outlets before
cleaning the system.
• If you encounter the following technical problems with the product,
unplug the power cord and contact a qualified service technician or
your retailer.
–The power cord or plug is damaged.
–Liquid has been spilled into the system.
–The system does not function properly even if you follow
the operating instructions.
–The system was dropped or the cabinet is damaged.
–The system performance changes.
CAUTION: Danger of explosion if battery is incorrectly eplaced. Replace only
with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer’s instructions.
Lithium-Metal Battery Warning
IMPORTANT! To provide electrical insulation and maintain
electrical safety, a coating is applied to insulate the device
except on the areas where the I/O ports are located.
COATING NOTICE
ASUS recycling and takeback programs come from our commitment to
the highest standards for protecting our environment. We believe in
providing solutions for you to be able to responsibly recycle our products,
batteries, other components, as well as the packaging materials. Please
go to http://csr.asus.com/english/Takeback.htm for the detailed
recycling information in different regions.
ASUS Recycling/Takeback Services
Complying with the REACH (Registration, Evaluation, Authorization, and
Restriction of Chemicals) regulatory framework, we publish the chemical
substances in our products at ASUS REACH website at
http://csr.asus.com/english/REACH.htm
REACH
Regulatory notices
DO NOT throw the system in municipal waste. This product has been
designed to enable proper reuse of parts and recycling. This symbol
of the crossed out wheeled bin indicates that the product (electrical,
electronic equipment, and mercury-containing button cell battery)
should not be placed in municipal waste. Check local technical
support services for product recycling.
The warranty does not apply to the products that have been
disassembled by users
NO DISASSEMBLY