User Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS Setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 LVDS Configuration
- 3.3.2 PCH-FW Configuration
- 3.3.3 Trusted Computing
- 3.3.4 CPU Configuration
- 3.3.5 Graphics Configuration
- 3.3.6 Power Management
- 3.3.7 PCI Express Configuration
- 3.3.8 AMT Configuration
- 3.3.9 Super IO Configuration
- 3.3.10 Serial Console Redirection
- 3.3.11 SATA Configuration
- 3.3.12 VMD setup menu
- 3.3.13 Network Stack Configuration
- 3.3.14 USB Configuration
- 3.3.15 NVMe Configuration
- 3.3.16 Onboard Devices Configuration
- 3.3.17 Miscellaneous
- 3.3.18 APM Configuration
- 3.3.19 EZ-Flash
- 3.3.20 Watchdog Timer
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- BIOS setup
- Appendix
3-15
Chapter 3: BIOS setup
Wake up hour
Allows you to enter a natural number within 0-23 for hour. For example, enter
3 for 3:00 am and 15 for 3:00 pm.
Wake up minute
Allows you to enter a natural number within 0-59 for minute.
Wake up second
Allows you to enter a natural number within 0-59 for second.
The following items appear when you set Power On By RTC to [Monthly
event].
Day of the Month
Allows you to select the day of the month when the system is to wake up.
Wake up hour
Allows you to enter a natural number within 0-23 for hour. For example, enter
3 for 3:00 am and 15 for 3:00 pm.
Wake up minute
Allows you to enter a natural number within 0-59 for minute.
Wake up second
Allows you to enter a natural number within 0-59 for second.
3.3.19 EZ-Flash
This item allows you to enter EZ-Flash mode. After you press <Enter>, a
confirmation message appears. Use the left/right arrow key to select between [Yes]
or [No], then press <Enter> to confirm your choice.
3.3.20 Watchdog Timer
Watchdog Support
Configuration options: [Disabled] [Enabled]
The following items appear when you set Watchdog Support to [Enable].
Watchdog Count mode
Allows you to select Watchdog Timer I count mode.
Configuration options: [Second Mode] [Minute Mode]
Watchdog Timer
Allows you to set the Watchdog Timer I Time-out value.
3.4 Hardware Monitor menu
The Hardware Monitor menu displays the system temperatures, fan and power
status, and allows you to configure the smart fan.