User's Manual

3-13
Chapter 3: BIOS setup
3.3.9 SATA Configuration
This item allows you to configure SATA device options settings.
SATA Controller(s)
Allows you to enables or disables the onboard SATA device.
Configuration options: [Disabled] [Enabled]
The following item appears only when you set SATA Controller(s) to [Enabled].
SATA Mode Selection
Allows you to determine how SATA controller(s) operate.
Configuration options: [AHCI]
SATA6G_1(~7)
Allows you to enable or disable SATA Port.
Configuration options: [Disabled] [Enabled]
M.2
Configuration options: [Disabled] [Enabled]
3.3.10 VMD setup menu
Enable VMD controller
This item allows you to disable or enable VMD controller.
Configuration options: [Disabled] [Enabled]
3.3.11 Network Stack Configuration
Network Stack
This item allows you to disable or enable the UEFI Network Stack.
Configuration options: [Disabled] [Enabled]
The following items appear only when you set Network Stack to [Enabled].
IPv4 PXE Support
Allows you to enable or disable IPv4 PXE boot support. If disabled, IPv4 PXE boot
support will be unavailable.
Configuration options: [Disabled] [Enabled]
IPv6 PXE Support
Allows you to enable or disable IPv6 PXE boot support. If disabled, IPv6 PXE boot
support will be unavailable.
Configuration options: [Disabled] [Enabled]