User's Manual
Table Of Contents
- Chapter 1 Product Overview
- Chapter 2: Motherboard information
- Chapter 3: BIOS setup
- 3.1 BIOS Setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 PCH-FW Configuration
- 3.3.2 Trusted Computing
- 3.3.3 CPU Configuration
- 3.3.4 Graphics Configuration
- 3.3.5 Power Management
- 3.3.6 PCI Express Configuration
- 3.3.7 Super IO Configuration
- 3.3.8 Serial Console Redirection
- 3.3.9 SATA Configuration
- 3.3.10 VMD setup menu
- 3.3.11 Network Stack Configuration
- 3.3.12 USB Configuration
- 3.3.13 NVMe Configuration
- 3.3.14 Onboard Devices Configuration
- 3.3.15 APM Configuration
- 3.3.16 EZ-Flash
- 3.3.17 Watchdog Timer
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- Appendix
3-9
Chapter 3: BIOS setup
Serial Port 3 Configuration
This item allows you to set parameters of Serial Port 3 (COMC).
Serial Port
Allows you to enable or disable the serial port (COM).
Configuration options: [Disabled] [Enabled]
Serial Port 4 Configuration
This item allows you to set parameters of Serial Port 4 (COMD).
Serial Port
Allows you to enable or disable the serial port (COM).
Configuration options: [Disabled] [Enabled]
Serial Port 5 Configuration
This item allows you to set parameters of Serial Port 5 (COME).
Serial Port
Allows you to enable or disable the serial port (COM).
Configuration options: [Disabled] [Enabled]
Serial Port 6 Configuration
This item allows you to set parameters of Serial Port 5 (COMF).
Serial Port
Allows you to enable or disable the serial port (COM).
Configuration options: [Disabled] [Enabled]
Parallel Port Configuration
This item allows you to set parameters of Parallel Port (LPT/LPTE).
Parallel Port
Allows you to enable or disable the Parallel Port (LPT/LPTE).
Configuration options: [Disabled] [Enabled]
The following item appears only when you set Parallel Port to [Enabled].
Device Mode
Allows you to change the Printer Port mode.
Configuration options: [STD Printer Mode] [SPP Mode] [EPP-1.9 and SPP
Mode] [EPP-1.7 and SPP Mode] [ECP Mode] [ECP and EPP 1.9 Mode] [ECP
and EPP 1.7 Mode]