User's Manual

3-8
Q670EA-IM-A
PCIe Speed
Allows you to configure the PCIe speed.
Configuration options: [Auto] [Gen1] [Gen2] [Gen3] [Gen4]
Detect Timeout
Allows you to set the time (milliseconds) of waiting for link to exit Detect state
for enabled ports before assuming there is no device and potentially disabling
the port. Use the <+> and <-> keys to adjust the value or input the desired
value.
Detect Non-Compliance Device
When set to [Enabled], this item allows you to detect the non-compliance
device in PEG.
Configuration options: [Disabled] [Enabled]
3.3.7 Super IO Configuration
Serial Port 1 Configuration
This item allows you to set parameters of Serial Port 1 (COMA).
Serial Port
Allows you to enable or disable the serial port (COM).
Configuration options: [Disabled] [Enabled]
The following item appears only when you set Serial Port to [Enabled].
COM1 Control
Allows you to select COM1 mode.
Configuration options: [RS232] [RS422] [RS485]
Serial Port 2 Configuration
This item allows you to set parameters of Serial Port 2 (COMB).
Serial Port
Allows you to enable or disable the serial port (COM).
Configuration options: [Disabled] [Enabled]
The following item appears only when you set Serial Port to [Enabled].
COM2 Control
Allows you to select COM2 mode.
Configuration options: [RS232] [RS422] [RS485]