User's Manual

1-3
Chapter 1: General information
(continued on the next page)
Internal I/O ports
4 x COM Port headers (1 x RS232/422/485, 3 x RS232)
1 x USB 3.2 Gen 1 connector supports additional 2 USB 3.2
Gen 1 ports
1 x USB 3.2 Gen 1 stick socket
1 x USB 2.0 connector supports additional 2 USB 2.0 ports
1 x CPU Fan connector with PWM mode
1 x Chassis Fan connector with PWM mode
1 x Disable ME connector
1 x LVDS/eDP Signal connector
1 x LVDS/eDP Backlight panel connector
1 x I
2
C connector
1 x LCD panel monitor switch header
1 x Front panel audio header (AAFP)
1 x System panel header
1 x S/PDIF connector
1 x Chassis intrusion header
1 x Speaker connector
1 x Clear CMOS header
1 x LPC Debug header
1 x AT/ATX mode selection header
1 x 24-pin ATX power connector
1 x 8-pin ATX power connector
1 x Display panel VCC power selection header
1 x M.2 socket 1 (Key E, 2230) with PCIe and CNVI modes
for WiFi/BT device
1 x M.2 socket 3 (Key M, 2242/2260/2280) with PCIe and
SATA modes
1 x WDT Enable header
3 x SATA 6.0Gb/s connectors
1 x TPM connector
1 x RTC Battery connector
1 x LVDS/eDP Panel Enable Signal Selection header
GPIO
1 x 8-bit GPIO header
Manageability
WfM 2.0, DMI 2.0, WOL by PME
Watch dog timer
Yes
Power requirement
ATX mode
12V DC-IN (Supported by an additional cable)
Operation Temperature
0~60°C
Non-Operation
Temperature
-40~85°C