User's Manual

3-8
Q470EI-IM-A
3.3.7 AMT Configuration
This item allows you to congure Intel
®
Active Management Technology parameters.
AMT BIOS Features
Allows you to enable or disable AMT BIOS Features. When set to [Disabled], MEBx
Setup will be inaccessible.
Conguration options: [Disabled] [Enabled]
This item does not disable Manageability Features in FW.
USB Provisioning of AMT
Allows you to enable or disable AMT USB Provisioning.
Conguration options: [Disabled] [Enabled]
End Of Post Message
Allows you to enable or disable End of Post message sent to ME.
Conguration options: [Disabled] [Enabled]
Secure Erase Configuration
Secure Erase mode
Allows you to change Secure Erase module behavior.
Conguration options: [Simulated] [Real]
[Simulated] Performs SE flow without erasing SSD.
[Real] Erases SSD.
Force Secure Erase
Allows you to force Secure Erase on next boot.
Conguration options: [Disabled] [Enabled]
OEM Flags Settings
Allows you to congure OEM Flags.
MEBx Selection Screen
Allows you to enable MEBx selection screen by pressing 1 to enter ME
Congure Screen or pressing 2 to initiate a remote connection.
Conguration options: [Disabled] [Enabled]
Network Access must be activated from MEBx Setup for this screen to be
dispalyed.
Unconfigure ME
Allows you to uncongure ME by resetting the MEBx password to default.
Conguration options: [Disabled] [Enabled]
3.3.8 CSM Configuration
CSM Support
Allows you to enable or disable CSM (Compatibility Support Module) Support.
Conguration options: [Disabled] [Enabled]