User Manual

1-3
Chapter 1: General information
Internal I/O ports
5 x COM Port headers (1 x RS232/422/485, 4 x RS232)
1 x USB 3.2 Gen 1 connector supports additional 2 USB 3.2
Gen 1 ports
2 x USB 2.0 vertical connectors
1 x USB 2.0 header supports additional 2 USB 2.0 ports
1 x CPU Fan header with PWM mode
3 x Chassis Fan headers with PWM mode
6 x SATA 6.0Gb/s ports
1 x RTC Battery connector
1 x Chassis Intrusion header
1 x Front Panel Audio header (AAFP)
1 x System Panel header
1 x Clear CMOS header
1 x Speaker header
1 x LPC Debug header
1 x I
2
C header
1 x LPT header
1 x Buzzer
1 x GPIO header
1 x S/PDIF header
1 x WDT Enable header
1 x TPM connector
1 x M.2 M Key, type 2242/2260/2280 (PCIe x4 / SATA mode)
1 x M.2 B key, type 3042/3052/2260/2280 (PCIe x1/USB 3.2
Gen1/USB 2.0), *type 3042/3052 support 4G/5G module
1 x M.2 E Key, type 2230 (PCIe x1 / USB2.0)
1 x 24-pin ATX power connector
1 x 8-pin ATX power connector
1 x AT/ATX mode selection jumper
1 x Disable ME jumper
Manageability
WfM 2.0, DMI 2.0, WOL by PME, GPIO
Watch dog timer
Yes
Power requirement
AT/ATX mode
Operation
Temperature
0~60°C
Non-Operation
Temperature
-40~85°C
(continued on the next page)