User Manual

3-21
Chapter 3: BIOS setup
Bootup NumLock State
Allows you to select the keyboard NumLock state. Conguration options: [On]
[Off]
Quiet Boot
Conguration options: [Disabled] [Enabled]
Fast Boot
Allows you to enable or disable boot with initialization of a minimal set of
devices required to launch active boot option. This has no effect for BBS boot
options. Conguration options: [Disabled] [Enabled]
[Enabled] Select to accelerate the boot speed.
[Disabled] Select to go back to normal boot speed.
Boot mode select
Conguration options: [LEGACY] [UEFI]
FIXED BOOT ORDER Priorities
Boot Option #1(~10)
Allows you to set the system boot order. Conguration options: [Hard Disk]
[NVME] [CD/DVD] [SD] [USB Hard Disk] [USB CD/DVD] [USB Key:UEFI:
Generic-SD/MMC, Partition 1] [USB Floppy] [USB Lan] [Network] [Disabled]
UEFI USB Key Drive BBS Priorities
Boot Option #1
Allows you to set the system boot order.
Conguration options: [UEFI: Generic-SD/MMC, Partition 1] [Disable]
3.7 Exit menu
The items in the Exit menu allow you to save or discard your changes to the BIOS
items.
Save Changes and Exit
Allows you to exit the system setup program after saving the changes.
Discard Changes and Exit
Allows you to exit the system setup program without saving the changes you
made. When you select this option or if you press <Esc>, a conrmation window
appears. Select Yes to discard changes and exit.
Save Changes and Reset
Allows you to reset the system setup after saving the changes.