User Manual

3-17
Chapter 3: BIOS setup
ErP Ready
Allows BIOS to switch off some power at S5 to get the system ready for ErP
requirement. When set to [Enabled], all other PME options will be switched off.
Conguration options: [Disabled] [Enabled]
Restore AC Power Loss
Allows you to select AC power state when power is re-applied after a power failure.
Conguration options: [S5 State] [S0 State]
Power On By PCIE
Allows you to enable or disable the Wake-on-LAN function of the onboard LAN
controller or other installed PCIe LAN cards. Conguration options: [Disabled]
[Enabled]
Power On By PCI
Allows you to enable or disable the Wake-on-LAN function by installed PCI
devices. Conguration options: [Disabled] [Enabled]
Power On By PS2
Allows you to enable or disable the Wake-on-LAN function by installed PS2
devices. Conguration options: [Disabled] [Enabled]
Power On By Ring
Conguration options: [Disabled] [Enabled]
Power On By RTC
Conguration options: [Disabled] [Enabled]
The following items appear when you set Power On By RTC to [Enabled].
RTC Alarm Date (Days)
Allows you to set the value for number of days of RTC Alarm Date. Value 0
represents “Every Day”.
Wake up hour
Allows you to enter a natural number within 0-23 for hour. For example, enter
3 for 3:00 am and 15 for 3:00 pm.
Wake up minute
Allows you to enter a natural number within 0-59 for minute.
Wake up second
Allows you to enter a natural number within 0-59 for second.