User Manual

3-14
Q470EA-IM-A
RAID Device ID
Allows you to choose RAID device ID. Conguration options: [Client]
[Alternate]
Use RST Legacy OROM
Allows you to use RST Legacy OROM when CSM is enabled. Conguration
options: [Disabled] [Enabled]
Aggressive LPM Support
Allows you to enable PCH to aggressively enter link power state. Conguration
options: [Disabled] [Enabled]
Serial ATA Port 1 ~ Serial ATA Port 6
Port 1~ Port 6
Allows you to enable or disable SATA Port. Conguration options: [Disabled]
[Enabled]
Hot Plug
Allows you to designate this port as Hot Pluggable. Conguration options:
[Disabled] [Enabled]
3.3.11 Network Stack Configuration
Network Stack
This item allows user to disable or enable the UEFI Network Stack. Conguration
options: [Disabled] [Enabled]
The following items appear only when you set Network Stack to [Enabled].
IPv4 PXE Support
Allows you to enable or disable IPv4 PXE boot support. If disabled, IPv4 PXE
boot support will be unavailable. Conguration options: [Disabled] [Enabled]
IPv6 PXE Support
Allows you to enable or disable IPv6 PXE boot support. If disabled, IPv6 PXE
boot support will be unavailable. Conguration options: [Disabled] [Enabled]
PXE boot wait time
Use either +/- or numeric keys to set the value for wait time (in seconds) to
press ESC key to abort the PXE boot.
Media detect count
Use either +/- or numeric keys to set the value for number of times the
presence of media will be checked.