User Manual

3-8
Q470EA-IM-A
Detect Timeout
This item allows you to set the detection time (milliseconds) for enabled ports before it
exit the detection status.
Detect Non-Compliance Device
This item allows you to enable or disable detection of non-compliance PCI Express
devices. If enabled, more time will be required during POST. Conguration options:
[Disabled] [Enabled]
3.3.6 AMT Configuration
This item allows you to congure Intel
®
Active Management Technology parameters.
AMT BIOS Features
Allows you to enable or disable AMT BIOS Features. When set to [Disabled], MEBx
Setup will be inaccessible. Conguration options: [Disabled] [Enabled]
This item does not disable Manageability Features in FW.
USB Provisioning of AMT
Allows you to enable or disable AMT USB Provisioning. Conguration options:
[Disabled] [Enabled]
End Of Post Message
Allows you to enable or disable End of Post message sent to ME. Conguration
options: [Disabled] [Enabled]
Secure Erase Configuration
Secure Erase mode
Allows you to change Secure Erase module behavior. Conguration options:
[Simulated] [Real]
[Simulated] Performs SE flow without erasing SSD.
[Real] Erases SSD.
Force Secure Erase
Allows you to force Secure Erase on next boot. Conguration options:
[Disabled] [Enabled]
OEM Flags Settings
Allows you to congure OEM Flags.
MEBx Selection Screen
Allows you to enable MEBx selection screen by pressing 1 to enter ME
Congure Screen or pressing 2 to initiate a remote connection. Conguration
options: [Disabled] [Enabled]
Network Access must be activated from MEBx Setup for this screen to be
dispalyed.