User Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS Setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 PCH-FW Configuration
- 3.3.2 Trusted Computing
- 3.3.3 CPU Configuration
- 3.3.4 Graphics Configuration
- 3.3.5 PCI Express Configuration
- 3.3.6 AMT Configuration
- 3.3.7 CSM Configuration
- 3.3.8 Super IO Configuration
- 3.3.9 Serial Console Redirection
- 3.3.10 SATA And RST Configuration
- 3.3.11 Network Stack Configuration
- 3.3.12 USB Configuration
- 3.3.13 NVMe Configuration
- 3.3.14 Onboard Devices Configuration
- 3.3.15 EZ-Flash
- 3.3.16 APM Configuration
- 3.3.17 Watchdog Timer
- 3.3.19 Miscellaneous
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- BIOS setup
- Appendix
Q470EA-IM-A
2-14
LAN port LED indications
LAN port
Speed
LED
Activity Link
LED
Activity/Link LED Speed LED
Status Description Status Description
Off No link OFF 10Mbps connection
Orange Linked ORANGE 100Mbps connection
Orange (Blinking) Data activity GREEN 1Gbps connection
Orange (Blinking
then steady)
Ready to wake up
from S5 mode
6. Line In port (light blue). This port connects to the tape, CD, DVD player, or
other audio sources.
7. Line Out port (lime). This port connects to a headphone or a speaker. In
the 4 and 5.1 channel congurations, the function of this port becomes Front
Speaker Out.
8. HDMI
TM
port. This port is for a High-Denition Multimedia Interface (HDMI
TM
)
connector, and is HDCP compliant allowing playback of HD DVD, Blu-ray,
and other protected content.
9. DisplayPorts. These ports are for DisplayPort-compatible devices.
10. USB 2.0 ports. These 4-pin Universal Serial Bus (USB) ports are for USB
2.0/1.1 devices.
11. USB 3.2 Gen 2 (up to 10Gbps) port (USB Type-C
®
). This 9-pin Universal
Serial Bus 3.2 (USB 3.2) port is for USB 3.2 Gen 2 Type-C
®
devices.
12. USB 3.2 Gen 2 (up to 10Gbps) ports (teal blue, Type-A). These 9-pin
Universal Serial Bus (USB) ports are for USB 3.2 Gen 2 devices.
13. Microphone port (pink). This port connects to a microphone.
Refer to the audio conguration table for the function of the audio ports in 2, 4,
5.1, or 7.1-channel conguration.
Audio 2, 4, 5.1 or 7.1-channel configuration
Port
Headset
2-channel
4-channel 5.1-channel 7.1-channel
Light Blue (Rear panel) Line In Rear Speaker Out Rear Speaker Out Rear Speaker Out
Lime (Rear panel) Line Out Front Speaker Out Front Speaker Out Front Speaker Out
Pink (Rear panel) Mic In Mic In Bass/Center Bass/Center
Lime (Front panel) — — —
Side Speaker Out*/
Headphone
Pink (Front panel) — — —
Mic In*/
Side Speaker Out
* Multi-streaming is disabled by default, and the Lime (front panel) jack may be used as Side Speaker Out. If multi-
streaming is enabled, the Lime (front panel) jack will support headphone, and Pink (front panel) jack will support
Side Speaker Out.
To configure a 7.1-channel audio output:
Use a chassis with HD audio module in the front panel to support a
7.1-channel audio output.