User Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS Setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 PCH-FW Configuration
- 3.3.2 Trusted Computing
- 3.3.3 CPU Configuration
- 3.3.4 Graphics Configuration
- 3.3.5 PCI Express Configuration
- 3.3.6 AMT Configuration
- 3.3.7 CSM Configuration
- 3.3.8 Super IO Configuration
- 3.3.9 Serial Console Redirection
- 3.3.10 SATA And RST Configuration
- 3.3.11 Network Stack Configuration
- 3.3.12 USB Configuration
- 3.3.13 NVMe Configuration
- 3.3.14 Onboard Devices Configuration
- 3.3.15 EZ-Flash
- 3.3.16 APM Configuration
- 3.3.17 Watchdog Timer
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- BIOS setup
- Appendix
3-16
Q470A-EM-A
Power On By Ring
Conguration options: [Disabled] [Enabled]
Power On By RTC
Conguration options: [Disabled] [Enabled]
The following items appear when you set Power On By RTC to [Enabled].
RTC Alarm Date (Days)
Allows you to set the value for number of days of RTC Alarm Date. Value 0
represents “Every Day”.
Wake up hour
Allows you to enter a natural number within 0-23 for hour. For example, enter
3 for 3:00 am and 15 for 3:00 pm.
Wake up minute
Allows you to enter a natural number within 0-59 for minute.
Wake up second
Allows you to enter a natural number within 0-59 for second.
3.3.16 Watchdog Timer
Watchdog Support
Conguration options: [Disabled] [Enabled]
The following items appear when you set Watchdog Support to [Enabled].
Watchdog Count mode
Allows you to select Watchdog Timer I count mode. Conguration options: [Second
Mode] [Minute Mode]
Watchdog Timer
Allows you to set the Watchdog Timer I Time-out value.