User Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS Setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 PCH-FW Configuration
- 3.3.2 Trusted Computing
- 3.3.3 CPU Configuration
- 3.3.4 Graphics Configuration
- 3.3.5 PCI Express Configuration
- 3.3.6 AMT Configuration
- 3.3.7 CSM Configuration
- 3.3.8 Super IO Configuration
- 3.3.9 Serial Console Redirection
- 3.3.10 SATA And RST Configuration
- 3.3.11 Network Stack Configuration
- 3.3.12 USB Configuration
- 3.3.13 NVMe Configuration
- 3.3.14 Onboard Devices Configuration
- 3.3.15 EZ-Flash
- 3.3.16 APM Configuration
- 3.3.17 Watchdog Timer
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- BIOS setup
- Appendix
3-13
Chapter 3: BIOS setup
RAID Device ID
Allows you to choose RAID device ID. Conguration options: [Client]
[Alternate]
Use RST Legacy OROM
Allows you to use RST Legacy OROM when CSM is enabled. Conguration
options: [Disabled] [Enabled]
SATA6G_1/2/3/4
Allow you to enable/disable the SATA6G_1/2/3/4 port. Conguration options:
[Disabled] [Enabled]
M.2
Allow you to enable/disable the M.2 slot. Conguration options: [Disabled]
[Enabled]
M.2 slot shares bandwidth with SATA6G_2. When M.2 slot is operating in SATA
mode, SATA6G_2 will be disabled.
3.3.10 Network Stack Configuration
Network Stack
This item allows user to disable or enable the UEFI Network Stack. Conguration
options: [Disabled] [Enabled]
The following items appear only when you set Network Stack to [Enabled].
IPv4 PXE Support
Allows you to enable or disable IPv4 PXE boot support. If disabled, IPv4 PXE
boot support will be unavailable. Conguration options: [Disabled] [Enabled]
IPv6 PXE Support
Allows you to enable or disable IPv6 PXE boot support. If disabled, IPv6 PXE
boot support will be unavailable. Conguration options: [Disabled] [Enabled]
PXE boot wait time
Use either +/- or numeric keys to set the value for wait time (in seconds) to
press ESC key to abort the PXE boot.
Media detect count
Use either +/- or numeric keys to set the value for number of times the
presence of media will be checked.