User Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS Setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 PCH-FW Configuration
- 3.3.2 Trusted Computing
- 3.3.3 CPU Configuration
- 3.3.4 Graphics Configuration
- 3.3.5 PCI Express Configuration
- 3.3.6 AMT Configuration
- 3.3.7 CSM Configuration
- 3.3.8 Super IO Configuration
- 3.3.9 Serial Console Redirection
- 3.3.10 SATA And RST Configuration
- 3.3.11 Network Stack Configuration
- 3.3.12 USB Configuration
- 3.3.13 NVMe Configuration
- 3.3.14 Onboard Devices Configuration
- 3.3.15 EZ-Flash
- 3.3.16 APM Configuration
- 3.3.17 Watchdog Timer
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- BIOS setup
- Appendix
3-5
Chapter 3: BIOS setup
Enhanced C-states
Allows you to enable or disable C1E. CPU will switch to minimum speed when all
cores enter C-state. Conguration options: [Disabled] [Enabled]
Power Limit 1 Override
[Disabled] Disables power limit 1.
[Enabled] Enables power limit 1.
Power Limit 2 Override
[Disabled] Disables power limit 2.
[Enabled] Enables power limit 2.
Power Limit 2
This item allows you to input the value of power limit 2 in milliwatts. If the
value is 0, BIOS will program this value as 1.25 times of Processor Base
Power (TDP). For 12.50W, enter 12500. Processor applies control policies so
that the package power does not exceed this limit.
Package C State Limit
Set the maximum package C state limit. Conguration options: [C0/C1] [C2]
[C3] [C6] [C7] [C7S] [C8] [C9] [C10] [Cpu Default] [Auto]
[Cpu Default] Leaves to factory default value.
[Auto] Initializes to deepest available Package C State Limit.
3.3.4 Graphics Configuration
This item allows you to select a primary display from IGFX and PEG graphical
devices.
Primary Display
Allows you to select which of the IGFX/PEG Graphics devices should be the
primary display or select SG for switchable Gfx. Conguration options: [Force]
[Auto] [IGFX] [PCI] [PEG]
Internal Graphics
Conguration options: [Auto] [Disabled] [Enabled]
[Auto] Keeps IGFX enabled base on the setup options.
[Disabled] Disables internal graphics.
[Enabled] Enables internal graphics.
RC6 (Render Standby)
Allows you to enable or disable render standby support. Conguration options:
[Disabled] [Enabled]