User Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS Setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 PCH-FW Configuration
- 3.3.2 Trusted Computing
- 3.3.3 CPU Configuration
- 3.3.4 Graphics Configuration
- 3.3.5 PCI Express Configuration
- 3.3.6 AMT Configuration
- 3.3.7 CSM Configuration
- 3.3.8 Super IO Configuration
- 3.3.9 Serial Console Redirection
- 3.3.10 SATA And RST Configuration
- 3.3.11 Network Stack Configuration
- 3.3.12 USB Configuration
- 3.3.13 NVMe Configuration
- 3.3.14 Onboard Devices Configuration
- 3.3.15 EZ-Flash
- 3.3.16 APM Configuration
- 3.3.17 Watchdog Timer
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- BIOS setup
- Appendix
Q470A-EM-A
2-20
5. USB 3.2 Gen 1 header (20-1 pin U32G1_56)
Connect a USB 3.2 Gen 1 module to this connector for additional USB 3.2
Gen 1 front or rear panel ports. This connector complies with USB 3.2 Gen
1 specications and provides faster data transfer speeds of up to 5 Gbps,
faster charging time for USB-chargeable devices, optimized power efciency,
and backward compatibility with USB 2.0.
+5V_USB_P56
S_U3RXDN5
S_U3RXDP5
GND
S_U3TXDN5
S_U3TXDP5
GND
S_U2DN5
S_U2DP5
GND
PIN 1
PIN 19PIN 20
+5V_USB3_P56
S_U3RXDN6
S_U3RXDP6
GND
S_U3TXDN6
S_U3TXDP6
GND
S_U2DN6
S_U2DP6
U32G1_56
Connector type
BOX HD 2x10p, K20, 2.0mm pitch
6. TPM header (14-1 pin TPM)
This header supports a Trusted Platform Module (TPM) system with a
Serial Peripheral Interface (SPI), allowing you to securely store keys, digital
certicates, passwords and data. A TPM system also enhances network
security, protects digital identities, and ensures platform integrity.
TPM
PIN 1 PIN 13
PIN 2
S_SPI_TPM_IRQ#
S_SPI_TPM_CS2#
T_SPI_BIOS_WP#
GND
T_SPI_CLK
T_SPI_MOSI
+VCC_SPI_TPM
S_PLTRST#_Onboard
NC
+3VSB_SPI
S_SPI_CS0#
T_SPI_MISO
T_SPI_HOLD#
Connector type
Header 2x7p, K14, 2.0mm pitch