User Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS Setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 PCH-FW Configuration
- 3.3.2 Trusted Computing
- 3.3.3 CPU Configuration
- 3.3.4 Graphics Configuration
- 3.3.5 PCI Express Configuration
- 3.3.6 AMT Configuration
- 3.3.7 CSM Configuration
- 3.3.8 Super IO Configuration
- 3.3.9 Serial Console Redirection
- 3.3.10 SATA And RST Configuration
- 3.3.11 Network Stack Configuration
- 3.3.12 USB Configuration
- 3.3.13 NVMe Configuration
- 3.3.14 Onboard Devices Configuration
- 3.3.15 EZ-Flash
- 3.3.16 APM Configuration
- 3.3.17 Watchdog Timer
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- BIOS setup
- Appendix
Q470A-EM-A
2-12
3. AT/ATX Mode selection jumper (3-pin AT_ATX_SEL)
Pins
1-2 (Default) High Avtive
2-3 Low Active
21 2 3
ATX MODE
(Default)
AT MODE
AT_ATX_SEL
Connector type
HEADER 1x3p, 2.54mm pitch, S/T
4. Disable ME jumper (3-pin DIS_ME)
This jumper allows you to enable or disable the Intel
®
ME function. Set this
jumper to pins 1-2 to enable (default) the Intel
®
ME function and to pins 2-3 to
disable it.
21
2 3
DIS_ME
ME update
not allowed
(Default)
ME Update
allowed
Connector type
HEADER 1x3p, 2.54mm pitch, S/T